Full All Wood
2005
Full All Wood
![]() |
![]() NEW 4pcs All Wood Single Full Kids Bedroom Set CM7100 US $1,299.00
|
![]() NEW 4pcs All Wood Single Full Kids Bedroom Set CM7013 US $1,499.00
|
![]() Full size Futon frame All wood 2 finish choices US $249.00
|
![]() Full size futon frame all wood warm cherry finish US $249.00
|
![]() New Twin Over Full Bunk Bed All Wood White Finish US $659.00
|
![]() 10x full gold sovereign of Elizabeth II in wood case all 1976 year of issue US $4,595.39
|
FAQ's For Solid and Engineered Wood Flooring
What is Solid Wood Flooring?
Solid wood is exactly as it sounds, one piece of wood from top to bottom.
What is the difference between Laminate and Real Wood Floors?
Real Wood floors will age and mature with your property, this means that they will mark and dent more easily than a laminate would but this is part of the character of real wood floors and should not be viewed as a fault of the product. The shade of the wood surface will change with exposure to sunlight. Dependant on the species, it will either lighten or darken with age. The shade variation will only go on to a certain level and then cease. Any unexposed surface areas will eventually catch up with the colour differences once exposed.
Depending on the type of Real Wood floor (solid v's engineered) it can sanded and re lacquered a number of times to prolong the life of the floor.
What is the difference between Solid Wood Flooring and Engineered Wood Flooring?
Each type of flooring has its specific use and choosing one over the other is dictated by your lifestyle and needs. Solid wood should be in a moisture-controlled environment. Solid wood (strip or plank effect) should be nailed down only and requires a wood sub floor. Solid wood can be glued to a variety of sub floor materials.
Engineered wood flooring consists of a multi-plied, cross-stacked backing with a real Wood Veneer (top layer of a selected species). Engineered wood flooring can be used on grade, above and below grade.
Engineered wood flooring is more dimensionally stable so it can be installed in areas where solid wood is not compatible due to moisture. Engineered wood (strip or plank effect) can be glued down over various sub floor. Some engineered woods (strip and plank ) can be nailed down which require a wood sub floor. Engineered woods can also be layed as a floating floor where the tongue and groove are glued together, but the floor is not anchored to the sub floor.
What is a "Floating Floor"?
Floating flooring is a flooring system laid down over a layer of underlay. So while the individual planks are glued together, the individual planks are not nailed or glued into the permanent floor. Instead, the planks form a system that "floats" over the layer of underlay. The underlay can be laid down over existing floors.
What is the required distance between the walls and the flooring boards?
When gluing a Real Wood to the subfloor an expansion gap of 15mm towards the walls is sufficient. With floating-floor installations for every metre of installation width the flooring requires a distance to the wall of at least 5mm, lengthwise an expansion gap of 15mm is sufficient.
Can I install the flooring using one pack after the other?
No, for a natural, harmonious looking installation is recommended to work with approximately 5 open packs of flooring and sort/choose the boards individually by colour.
How much wastage do I allow for?
Despite our strict sorting criteria and thorough quality control there may be certain material-specific peculiarities that customers come across during the on-site selection and installation process which may need to be cut out. Generally, we recommend adding 5% to the room's sqm-total for cutting scrap.
Which kind of Real Wood flooring is right for me?
The range of choices is huge. According to personal taste and character of the room you can choose between different wood types, board sizes, surface finishes (lacquer-finish or oil-impregnation), surface structures (Antique, Distressed, Brushed), impressions (Block or Wideplank) and styles.
Does sunlight have any effects on the flooring?
Yes, any kind of wood will change its colour over time. During this process light-coloured wood types are not necessarily going to get lighter, Dark Wood types however will get darker. Every wood type has a characteristic aging process of its own and will react in its individual way.
What is the maximum load a Real Wood flooring can bear on a single point?
With very large loads (e.g. pianos, aquariums, storage heaters and the like) we always recommend gluing down as the installation method of choice.
Can Engineered Real Wood flooring that has been installed as a floating floor be sanded and resurfaced?
Yes, but be aware that every sanding process will take off about 1mm of the flooring's wear-layer. Try not to use Very Heavy sanding machinery as the big weight of these machines may lead to the creation of "sanding waves"
How do I care for my oil-impregnated Real Wood floors?
Use Wood-Floor Soap for regular maintenance cleaning. Use a vacuum cleaner for lacquer-finished floors and damp-wipe only if needed.
Should your Floating Real Wood Flooring be installed under kitchen appliances?
In the kitchen, you should install the flooring under kitchen appliances, but be very careful when you slide the appliances over the floor. We recommend covering the flooring with something such as a spare rug to protect the flooring when you're moving the appliances.
Are there methods that make it possible for ALL stains to be removed from Real Wood Floors or is it sometimes impossible for some stains to be removed?
Most stains don't penetrate more than the sanding will remove. However, if you have a severe water stain, you may not be able to remove it.
How much of an irregularity (drop or rise) can there be in an existing sub floor before installing your Real Wood Flooring?
You can have a drop or rise up to 4mm over 2 linear metres.
Do Real Wood Floors increase home value?
Absolutely. Real Woods floors are recognised as one of the highest quality floors available and would increase the value of your home.
I am installing a Radiant Heat Floor System involving poly water tubing set in gypsum concrete that would be my sub-floor. Can your products be used with this type of floor heating system?
This installation is okay as long as the tubes don't touch the wood. You also would have to use a laminated underlay vapour barrier between the concrete and the floor.
Can your Real Wood Flooring be installed over Linoleum and be used on stairs?
Real Wood flooring can be installed on the stairs, however it can be slippery.
You can install our floating Real Wood flooring over linoleum if the linoleum remains sound and tightly glued to the original sub floor.
Is there a type of Real Wood Flooring (e.g. Maple v's Oak) that is more durable or longer lasting than another?
There isn't much difference between Real Wood flooring wood types. The only negative on oak is it's a rather porous wood, but it is a very hard durable wood, as are maple and beech. White Oak is slightly harder than Red Oak. Your choice will really come down to aesthetics.
My concrete floor has a few low spots in it and I was wondering what to use to solve this problem?
Most building materials suppliers have a concrete levelling product. We suggest levelling any areas that are more than 3/16" in variation. Make sure you use the underlay with a DPM before installing over concrete.
Do you have to install your Real Wood Flooring under existing cabinets?
Ideally, the Real Wood flooring would go under the cabinets. You can, however, cut around the cabinets if removing the cabinets would cause undue complications. Keep in mind, though, that if you were ever to change the cabinets, you could have a problem if the new cabinets weren't the same size as the old cabinets.
Is it possible to install a Real Wood as a floating floor over concrete?
Real Wood floor is designed exactly for this kind of application. It requires an underlay with a DPM over the concrete floor. The floating floor system can go directly over that.
If there were a crack in the concrete, would it cause problems with a Floating Floor installation?
We recommend that any cracks in concrete be filled with concrete filler and sealed prior to installation. If it's just a hairline crack you can simply cover the crack with duct tape. Keep in mind that underlay with a DPM must be installed prior to laying down the floor.
Important note prior to installation:
Relative Humidity should be maintained a 40-55% prior to installation and throughout the life span of the floor.
15mm expansion gap must be maintained around the perimeter of the floor.
About the Author
Real Wood Flooring FAQs brought to you by the flooring experts at Wood Flooring 2U
If you would like any further information on solid wood flooring, engineered wood flooring, laminate wood flooring or advice on how to install a wooden floor, please don't hesitate to get in touch, our knowledgeable team would be more than happy to help.
![]() |
Cheetah Mounts APDAM2B Plasma LCD Flat Screen TV Articulating Full Motion Dual Arm Wall Mount Bracket for 32 to 55-Inch Displays Up To 165Lbs Black List Price: $189.96 Sale Price: $38.95 |
|
This is a very substantial mount with Dual arms and heavy guage steel. The arms extend over 20" from the wall yet fold to less than 4.25". Even at full extension, this mount has very little sag or twist. It is rated for up to 165lbs and most displays 65" and smaller weigh under 100lbs. The unit has dual tilt adjustment knobs and it will tilt forward or back 15 degrees. The wall plate is 27.5" wide and has wide slots making it easy to mount into standard 16" studs even if they are not exactly 16" apart. The universal design will fit any display with a hole pattern up to 26.3" wide and 17" tall. The wall plate is 1/8" thick and very stable and includes large center hole for cable pass-though into the wall. This mount will swivel approximately 180 degrees depending on the size of your display. Dual TV safety screws are included to prevent accidental liftoff of the display. Installation instructions and hardware included. This mount also inckudes a 10' 1.4 HDMI Cable included. Capable of 3D signal, Audio Return, and Eathernet. This is a upgraded cable and similar cables sell for $15-$25. |
![]() |
Wagner 915 1,500-Watt On-Demand Power Steamer and Cleaner List Price: $150.00 Sale Price: $84.58 Used From: $75.00 |
|
This steamer expands from a wallpaper remover to a steamer that cleans and sanitizes and removes wallpaper, grease, and grime. It can clean barbeque grills, floors and rugs, is chemical-Free, and ha fingertip steam control for continuous or intermittent steam. It includes handle/pistol rest, two extension tubes, window/tile squeegee, floor cleaning head and pad, wallpaper steam plate, and an 8-foot steam hose and funnel. It is 1500 watts, has a 45 minute run time, and has a .4 gallon capacity. The Wagner Power Steamer can be used in every room in your home. It uses a pressurized steam system to complete repair or renovation jobs like removing wallpaper, and also cleans and sanitizes your home from top to bottom. Use it to clean grills, greasy stovetops, bathroom tile, and more. The Power Steamer works without chemicals, so it's safe and non-toxic, and won't leave behind any messy residue. It comes with a variety of accessories, including a window/tile squeegee, flooring cleaning head and pad, two extension tubes, measuring cup and fill funnel, and assorted utility brushes.On-Demand Power SteamerAt a Glance:Multi-purpose cleaning systemSafe, chemical-free way to remove wallpaper and clean and sanitize your homeTwo modes with fingertip control for continuous or intermittent steamRemoves wallpaper 20 percent faster than non-pressurized steam cleanersGreat for cleaning garage floors, upholstery, grills, tires, and moreIncludes window/tile squeegee, flooring cleaning head and pad, two extension tubes, measuring cup and fill funnel, and utility brushesPressurized steam makes removing wallpaper easy. View larger.Cleans and sanitizes all types of surfaces in your home without chemicals. View larger.Two Modes for Versatility and PowerThe Power Steamer provides powerful steam that you control with a pull of the power trigger. An illuminated green power light indicates that the steamer is ready to go. Two modes of operation release steam continuously or intermittently so you can match the cleaning or wallpaper removal power to the job at hand. The steamer's wheels move smoothly across all surfaces for easy use.Safe, Chemical-Free Formula Leaves No ResidueThe Power Steamer uses natural steam to remove wallpaper and clean and sanitize all types of surfaces in your home. It contains no chemicals, so it's safe to use around children and pets, and it won't leave behind greasy chemical residue. Use it to clean sofas, barbeque grills, greasy stove tops, bathroom fixtures, tile, floors, and rugs. Or rely on it to remove dirt and oil from your garage floor or clean up the winter snow and ice on your front porch or entryway.Fast, Effective Cleaning, Removal, and SanitizationThe Power Steamer removes wallpaper 20 percent faster than non-pressurized steam cleaners, and provides a thorough, deep clean of surfaces in and around your home. Its efficient cleaning action kills bacteria beneath the surface for complete sanitation. The steamer also features a jet nozzle that's great for cleaning mud off tires and grease and dirt off concrete, camping equipment, and lawn furniture.What's in the BoxPower steamer, window/tile squeegee, flooring cleaning head and pad, two extension tubes, measuring cup and fill funnel, utility brushes, and user manual. |
![]() |
Play On List Price: $13.98 Sale Price: $8.90 Used From: $4.47 |
|
Track Listings:1. Cowboy Casanova 2. Quitter 3. Mama's Song 4. Change 5. Undo It 6. Someday When I Stop Loving You 7. Songs Like This 8. Temporary Home 9. This Time 10. Look At Me 11. Unapologize 12. What Can I Say (Featuring Sons Of Sylvia) 13. Play On |
![]() |
Fleetwood Mac - The Dance List Price: $24.98 Sale Price: $14.50 Used From: $10.39 |
|
With each passing year bringing another high-profile rock reunion, prompted as often by balloon mortgage payments as any real artistic hunger, old fans could be excused for greeting 1997's announcement that the big Mac was back with skepticism: at their commercial zenith, Fleetwood Mac had offered superb transatlantic pop-rock with the added spice of a remarkable back-story, but the band's long decline and underwhelming later personnel shifts didn't bode well. Such guarded expectations make the musical punch of The Dance all the more impressive, and enable the meticulously produced concert special to genuinely surprise. The band's musicianship--the one constant between the original, late '60s English blues band and its platinum '70s lineup featuring guitarist Lindsey Buckingham and singer Stevie Nicks--is in peak form, buttressed by a discreet auxiliary of additional musicians. Even with the hired guns, though, it's the rock-solid rhythm section of founders Mick Fleetwood and John McVie, and Buckingham's impassioned playing that strike sparks. Always a dynamic guitarist, Buckingham brings feverish intensity to both group classics and solo turns such as "Go Insane." Both familiar hits and new songs (including the solid "Temporary One" and "Bleed to Love Her") further confirm that this isn't a rote exercise--the band sounds fully engaged. Buckingham, Nicks, and the elegant Christine McVie retain their vocal charm (although Nicks has clearly lost her upper register). And the sense of old wounds healed, and older affections acknowledged, gives true poignancy to the set's high mark, a brilliant live version of "Silver Springs," a truly haunting Rumours-era B-side that proves deeply moving. --Sam Sutherland Filmed in front of a live audience at Warner Brothers Studios in Burbank, California. Songs include: The Chain, Dreams, Everywhere, Im So Afraid, Temporary One, Bleed To Love Her, Gypsy, Big Love, Go Insane, Landslide, Say You Love Me, You Make Loving Fun, My Little Demon, Silver Springs, Over My Head, Rhiannon, Sweet Girl, Go Your Own Way, Tusk, Dont Stop and Songbird.System Requirements:Director: Bruce Gower Running Time: 106 Minutes, Color This film is presented in "Standard" format. Copyright: 1997 Warner Home Video. |
![]() |
Rodney Carrington: Live at the Majestic List Price: $14.98 Sale Price: $9.97 Used From: $2.74 |
|
Over an hour of hilarious standup comedy and music from Rodney's studio album King of the Mountains. Also features the gut-busting songs that launched him to the forefront of the comedy world.Format: DVD MOVIE Genre: COMEDY Rating: UNRATED UPC: 724354477591 Manufacturer No: 44775 |
![]() |
Star Wars: The Clone Wars - The Complete Season Two [Blu-ray] List Price: $59.98 Sale Price: $33.98 Used From: $22.99 |
|
The “Clone Wars” goes back to the original Star Wars film when Obi-Wan Kenobi tells Luke Skywalker that he was once a Jedi knight the same as your father and that they fought together in the Clone Wars. Since that moment fans have been obsessed with what the clone wars were. This new TV series takes place immediately after the events of Star Wars-Episode II: Attack of the Clones. The series follows Obi-Wan Kenobi and his apprentice Anakin Skywalker and introduces us to some new characters such as Ahsoka Tano a girl Jedi knight as well as characters we already know.Product Measures: .94 x 5.63 x 7.06 After an impressive debut season, the animated Star Wars: The Clone Wars roars back for a sophomore slate of adventures that tops its predecessor in both action and mythos-related dramatics. Situated in the Star Wars timeline between Episode II: Attack of the Clones and Episode III: Revenge of the Sith, the 22 episodes center around Anakin Skywalker's promotion to Jedi Knight in an attempt to rally the Jedis in the face of General Grievous's attacks. Joined by Obi-Wan Kenobi, he's sent to the planet Geonosis in pursuit of the villain, only to find its population enslaved--and worse--by the Separatists. The fight for the people of Geonosis is easily the highlight of the series, but secondary story lines offer solid intrigue as well, most notably in the arrival of bounty hunter Cad Bane, whose mission is to find children sensitive to the Force, and the appearance of Boba Fett, who vows to avenge the death of his father by Mace Windu. A rampaging giant monster, scads of political intrigue, and some genuinely impressive battle sequences all add to the enjoyment, but what really elevates season two is its darker tone, as evidenced in "Brain Invaders," where Anakin's torture of a prisoner gives a hint of his future, and the terrifying, zombiefied prisoners of Geonosis. The more serious approach, as well as the lack of comic relief (most notably, no Jar Jar Binks), will undoubtedly please adult Star Wars fans, though younger devotees might be somewhat disturbed by the turn of events; thankfully, there is plentiful action and derring-do to balance out the murkier deeds. Extras include substantive featurettes in which director Dave Filoni and his crew discuss a quartet of episodes, including the Geonosis story line and the influence of Godzilla on their own reptilian menace. There's also a detailed, 68-page booklet filled with character design and the artists' notes. --Paul Gaita |
![]() |
Star Wars: The Clone Wars - The Complete Season One [Blu-ray] List Price: $59.99 Sale Price: $39.56 Used From: $28.88 |
|
The “Clone Wars” goes back to the original Star Wars film when Obi-Wan Kenobi tells Luke Skywalker that he was once a Jedi knight the same as your father and that they fought together in the Clone Wars. Since that moment fans have been obsessed with what the clone wars were. This new TV series takes place immediately after the events of Star Wars-Episode II: Attack of the Clones. The series follows Obi-Wan Kenobi and his apprentice Anakin Skywalker and introduces us to some new characters such as Ahsoka Tano a girl Jedi knight as well as characters we already know.Product Measures: .75 x 5.63 x 7.63 The thrilling 3-D CGI animated series The Clone Wars serves as impressive proof that George Lucas's Star Wars universe could translate to a weekly television series that wouldn't lose the scope, imagination, or sense of adventure of the features. Like the 2008 feature film of the same name, the 22 episodes that compose the series' debut season (2008-2009) cover the action between Attack of the Clones and Revenge of the Sith. Here Obi-Wan Kenobi, Anakin Skywalker, and the latter's Padawan, 14-year-old Ahsoka Tano (who takes some getting used to), along with a complex cast of supporting characters from the Galactic Republic (including R2-D2 and C-3PO, again voiced by Anthony Daniels), battle the Separatists, which count members of the Sith and other adherents to the Dark Side of the Force among its ranks. The action is plentiful and the scripts rich with the quasi-mystical and eminently quotable dialogue on which the Star Wars saga has earned its legendary status; one can imagine only the most stringent purist or CGI detractor finding fault with the first season of The Clone Wars. The handsomely packaged four-disc set for season 1 includes a wealth of extras for those wishing to dig even deeper into the Clone Wars experience. Chief among the pleasant surprises is the widescreen aspect ratio for each episode, which gives greater depth and exposure to every single frame. Seven episodes are listed as Director's Cuts, which translates as an extra minute or two of action or dialogue--not earth-shattering, but they certainly enhance the enjoyment of each episode. Short featurettes, ranging between 5 and 7 minutes, accompany each episode and discuss production notes, character design, and other detail; these are expanded versions of the commentaries by supervising director Dave Filoni that were featured on StarWars.com, with additional contributions by series writer Henry Gilroy and sound designer David Acord, as well as new comments by Filoni. And there's a 64-page book of artwork from the series, including storyboards, concept design, and matte paintings, built into the body of the packaging itself. For the Easter Egg-inclined, a surprise awaits on each disc, including trailers for season 2 and animatics. --Paul Gaita |
![]() |
Cinderella (Walt Disney's Masterpiece) [VHS] List Price: $44.99 Sale Price: $6.99 Used From: $0.56 |
|
This is a GREAT movie and will love Disney's adaptation of the beloved fairy tale became a classic in its own right, thanks to some memorable tunes (including "A Dream Is a Wish Your Heart Makes," "Bibbidi-Bobbidi-Boo," and the title song) and some endearingly cute comic relief. We all know the story--the wicked stepmother and stepsisters simply won't have it, this uppity Cinderella thinking she's going to a ball designed to find the handsome prince an appropriate sweetheart, but perseverance, animal buddies, and a well-timed entrance by a fairy godmother make sure things turn out all right. There are a few striking sequences of pure animation--for example, Cinderella is reflected in bubbles drifting through the air--and the design is rich and evocative throughout. It's a simple story padded here agreeably with comic business, particularly Cinderella's rodent pals (dressed up conspicuously like the dwarf sidekicks of another famous Disney heroine) and their misadventures with a wretched cat named Lucifer. There's also much harrumphing and exposition spouting by the King and the Grand Duke. It's a much simpler and more graceful work than the more frenetically paced animated films of today, which makes it simultaneously quaint and highly gratifying. --David Kronke |
![]() |
IVEA Keyboard Silicone Cover Skin for New Aluminum Unibody Macbook Pro 13" 15" 17" - BLACK List Price: $19.99 Sale Price: $0.01 |
|
Fit all the newest Macbook Pro 13" 15" 17" Aluminum Unibody with black keyboard. MacBook Pro released Late 2008 and MacBook Pro released Mid 2009 |
|
|
Tenergy 3.5A Charger for 24V NiMH/NiCD Battery Pack $139.99 SpecificationRated output voltage24VOutput voltage20 V DC ~ 35V DCBattery capacity extend3Ah ~ 30AhNumber of cells20 NiMH/NiCD cells in seriesCharge current3.5A 0.2AMax. delivered power122.5WRated AC input100~240VAC 50/60HzInput voltage90~264VACRated input current1.0Arms (220VAC input and full load)Max. input power153W Accessories Included1 standard Tamiya Female connector.Alligator clips red + black.NTC cable.CautionThe charger is designed for indoor use only. Don't leave the charger unattended during charging.The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods. Don't cover the charger when charging, ambient temperature shall not be more than 40oCDon't touch the plug. Don't leave the batteries and chargers on wood surface or carpet.Cut off the power supply before connect or disconnect the charger with batteries. Don't try to disassemble the charger, High voltage inside, danger!Download product manual here. |
|
|
Tenergy Universal Smart 3A Battery Charger (Hybrid): 7.2V - 12V $59.99 Specification:Rated output voltage17.8V 0.2V Output voltage7 V DC ~ 18.5V DC Battery capacity extend0.8Ah ~ 15Ah (1A current)1.6Ah ~ 30Ah (2A current)2.4Ah ~ 45Ah (3A current) Number of cells6-10 NiMH/NiCD cells in series Charge current3A 0.2A / 2A 0.1A / 1A 0.1A Max. delivered power54W Rated AC input100~240VAC 50/60Hz Input voltage90~264VAC Rated input current0.55Arms (220VAC input and full load) Max. input power68W Accessories Included 1 standard Tamiya Female connector. Alligator clips (red + black). Temperature sensor (NTC) cable.Caution The charger is designed for indoor use only. Don't leave the charger unattended during charging.The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.Don't cover the charger when charging, ambient temperature shall not be more than 40oCDon't touch the plug.Don't leave the batteries and chargers on wood surface or carpet.Cut off the power supply before connect or disconnect the charger with batteries.Don't try to disassemble the charger, High voltage inside, danger!Download product manual here. |
|
|
Tenergy 3A Charger for 36V NiMH/NiCD Battery Pack $159.99 Specification:Rated output voltage36V Output voltage30 V DC ~ 52.5V DC Battery capacity extend2.4Ah ~ 30Ah Number of cells30 NiMH/NiCD cells in series Charge current3A 0.2A Max. delivered power158W Rated AC input100~240VAC 50/60Hz Input voltage90~264VAC Rated input current1.28Arms (220VAC input and full load) Max. input power197W Accessories Included 1 standard Tamiya Female connector. Alligator clips red + black. NTC cable.Caution The charger is designed for indoor use only. Don't leave the charger unattended during charging. The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.Don't cover the charger when charging, ambient temperature shall not be more than 40oC Don't touch the plug.Don't leave the batteries and chargers on wood surface or carpet. Cut off the power supply before connect or disconnect the charger with batteries.Don't try to disassemble the charger, High voltage inside, danger!Download product manual here. |
|
|
Universal Smart TLP-2000 Charger for Li-Ion/Polymer battery Pack (3.7V - 14.8V 1-4 cells) with Lipo Pack Balancer $99.99 Smart universal charger for Li-Ion and polymer Li-ion battery packwith capacity > 500mAh 4 Voltage selections at 3.6V, 7.2V, 10.8V and 14.4V Charges pack made of 1 to 4 cellsUniversal 100V - 240V AC input for worldwide powerusage 500 mA constant charging current.Automatic charging stop when battery packis fully charged ,or when each cell 's voltage reaches 4.2V peakLED indicationRedmeans " In Charging " and Greenmeans " Full " or "open circuits "With Tamiya Conncetor Weight4.5 ozDimension1.5" x 1" x 4"Operation Select right voltage level for your pack. For 3.6/3.7V 1-cell pack, set switch button 4.2 position on the chargerFor 7.2/7.4V 2-cell pack, set switch button 8.4 position on the chargerFor 10.8/11.1V 3-cell pack, set switch button 12.6 position on the chargerFor 14.4/14.8V 4-cell pack, set switch button 16.8 position on the chargerWarningUse special caution when working with Li-ion / Li-polymer cells and packs, they are very sensitive to charging characteristics and may explode if mishandled. Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use. Put the batteries in fire-proofenvironment in chargingNever leave batteries unattended when chargingDo not put batteries on wood surface or carpet when chargingWe are not responsible for any damage caused by misusing or mishandling of Li-Ion / Li-Polymer batteries in charging We are not responsible for damage caused by other Li-ion batteries not supplied from us Do not make any changes to the charger, charger accessories or connectors, as this might cause electrical shortage, fire or over-heating during charging. We are not liable for the product if any changes are made to the charger, accessories or connectors. Ultra-Balancer is the simplest method of keeping your Lipo packs balanced.It can be used for packs up to 14.8 volts (4S). Works as a stand-alone balancer before charging or simultaneously with your charger doing it's balancing function at the same time that your pack is being charged.2.5mm spacing on pin connection allows over 90% of the packs in the market to be used without any adapter required.offer an adapter in the "Accessories" category to facilitate the balancing of Thunder Power packs.Connector has 0.100 in pin spacing with 0.025 square pins and fits Apogee and other brands. Pins should be in orderred, black, black and black with no gaps or missing pins in the sequence.Using Your New Balancer Low Voltage Check First connect the Balancer to the Li-ion/Li-Polymer pack. Connect the most negative connection on the battery to the most negative pin on the balancer. If all cells are 3.2 volts or more all LEDs will turn on and remain lit for 5 seconds. If you have a three cell pack the first three LED will turn on. If one cell is low and has less than 3.2 volts that LED will not turn on. This means that your battery pack has been discharged too far. DO NOT CHARGE FAST!! Set your charge rate between 0.1 amps and 0.2 amps a |
|
|
Combo: Tenergy Smart Universal Charger for 7.2v-12v NiMH/NiCd Battery Packs + 2pcs 8.4v Mini 1600mAh NiMH Flat Battery Pack $74.99 Tenergy Smart Universal Charger for 7.2v - 12v NiMH/NiCd Battery Packs Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V. Universal for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack) Fast charger with current switch to select either, 0.9A and 1.8A. Delivers full charge within 1 - 2 hours.Charging Current 0.9A for battery packs with capacity from 900mAh -1800mAh. Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours.Smart Charger with automatic voltage detection.Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life. Red LED will be on during charging. Automatically charging ending with negative delta V. 4 hour safety timerCharger will stop charging after 4 hours of operation.Worldwide usage with 120-240V AC With Temperature sensor Safety protection fuse for over current, short circuit & reverse polarity protection. Includes:1 standard Tamiya connector. 1 connector adapter from standard Tamiya to Mini Tamiya. 1 set of alligator clip adapter with standard Tamiya connector on one end. 1 Temperature sensor Charger SpecificationFOR 7.2V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERYInputAC100-240VOutput7.2-12V 0.9or1.8AOperation InstructionConnect battery pack to output connector and plug AC power source. Make sure battery polarity is connected correctly (Red wire is positive) Charger will detect battery voltage automatically, Red LED will be on during charging When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on Battery will be charged at 0.9A or 1.8A constant current, Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery. The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun. Don't charge battery packs with voltage less than 6V or voltage greater than 12V and capacity smaller than1100mAh. Battery pack must be made by high drain current cell. Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage. CautionThe charger is designed for indoor use only. Don't leave the charger unattended during charging.The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods. Don't cover the charger when charging, ambient temperature shall not be more than 40oCDon't touch the plug. Don't leave the batteries and chargers on wood surface or carpet.Cut off the power supply before connect or disconnect the charger with batteries. Don't try to disassemble the charger, High voltage inside, danger!Tenergy 8.4v 1600mAh NiMH Flat Battery Pack (for Airsoft Gun)Product 8.4V 1600mAh NiMH Flat Battery Pack Make Made of 2/3A x 7 cells Connector Mini Tamiya FeMale connector assembled with 16 G wire Fit |
|
|
Full (Mirror) Screen Protector for Apple iPad 1 $6.99 :Complete full protection of iPad's front side which covers the entire LCD screen -- Perfect FitExactly as a mirror under the stand-by mode, but transparent when the screen is activeUV Protection -- reduces eye strain by blocking 99% of the UV emitted from LCD displayDust proofAnti-scratch & DurableTouch screen functions as normal with screen protectorSilicone Adhesive Coating -- no residue when you remove the screen from your LCDEasy installationAlso includedSoft nylon cleaning cloth to remove dust and dirt on your screen before application of screen protectorAccessory ONLY -- iPad not includedThe Screen Ward Crystal Clear Screen Protector is a good and an inexpensive way to prevent scratches and smudges on your Apple iPad's entire LCD screen. The ultra clear screen protector will keep your LCD screen looking like NEW - Ultra clear and super low profile that you barely know it is there.No sticky residue! Removable, Washable, and Reusable! Miraculous glass like crystal clarity! This screen protector will maintain the life and color of your device.TIPThis very small investment will guard against foreign objects (food, sticky fluids, smudges, etc) that can occur during your day-to-day use. Don't permanently ruin the LCD screen of your expensive iPad. - Tenergy product is a generic product, not an original OEM product.- Apple??, iPad??, and iPhone are trademarks of Apple,Inc.- Tenergy is not associated with Apple,Inc.- Tenergy product is not subject to any warranty by Apple,Inc. |
|
|
FULL Matte Screen Protector (Anti-Glare) for Apple iPad 1 $6.99 :Complete full protection of iPad's front side which covers the entire LCD screen -- Perfect FitIncomparable Clarity -- highly transparent to preserve the high resolution and vivid colors of your LCD displayUV Protection -- reduces eye strain by blocking 99% of the UV emitted from LCD displayDust proofAnti-scratch & DurableTouch screen functions as normal with screen protectorSilicone Adhesive Coating -- no residue when you remove the screen from your LCDEasy installationAlso includedSoft nylon cleaning cloth to remove dust and dirt on your screen before application of screen protectorAccessory ONLY -- iPad not includedThe Screen Ward Crystal Clear Screen Protector is a good and an inexpensive way to prevent scratches and smudges on your Apple iPad's entire LCD screen. The ultra clear screen protector will keep your LCD screen looking like NEW - Ultra clear and super low profile that you barely know it is there.No sticky residue! Removable, Washable, and Reusable! Miraculous glass like crystal clarity! This screen protector will maintain the life and color of your device.TIPThis very small investment will guard against foreign objects (food, sticky fluids, smudges, etc) that can occur during your day-to-day use. Don't permanently ruin the LCD screen of your expensive iPad. - Tenergy product is a generic product, not an original OEM product.- Apple??, iPad??, and iPhone are trademarks of Apple,Inc.- Tenergy is not associated with Apple,Inc.- Tenergy product is not subject to any warranty by Apple,Inc. |
|
|
FULL Transparent Clear Screen Protector for Apple iPad 1 $6.99 :Complete full protection of iPad's front side which covers the entire LCD screen -- Perfect FitIncomparable Clarity -- highly transparent to preserve the high resolution and vivid colors of your LCD displayUV Protection -- reduces eye strain by blocking 99% of the UV emitted from LCD displayDust proofAnti-scratch & DurableTouch screen functions as normal with screen protectorSilicone Adhesive Coating -- no residue when you remove the screen from your LCDEasy installationAlso includedSoft nylon cleaning cloth to remove dust and dirt on your screen before application of screen protectorAccessory ONLY -- iPad not includedThe Screen Ward Crystal Clear Screen Protector is a good and an inexpensive way to prevent scratches and smudges on your Apple iPad's entire LCD screen. The ultra clear screen protector will keep your LCD screen looking like NEW - Ultra clear and super low profile that you barely know it is there.No sticky residue! Removable, Washable, and Reusable! Miraculous glass like crystal clarity! This screen protector will maintain the life and color of your device.TIPThis very small investment will guard against foreign objects (food, sticky fluids, smudges, etc) that can occur during your day-to-day use. Don't permanently ruin the LCD screen of your expensive iPad. - Tenergy product is a generic product, not an original OEM product.- Apple??, iPad??, and iPhone are trademarks of Apple,Inc.- Tenergy is not associated with Apple,Inc.- Tenergy product is not subject to any warranty by Apple,Inc. |
|
|
3.2V 10Ah LiFePO4 (Lithium Iron Phosphate) Rechargeable Battery (DGR-A) $55.99 3.2V 10Ah LiFePO4 Rechargeable Battery. Maximum discharge rate2C. Maximum charge current10A. Maximum burst of30A. Recommended charging rate0.3C. Dimensions(L x W x T)231mm x 82mm x 8.2mm Weight278 gramsMUST READ INSTRUCTIONS BEFORE USEDownload Full Specification Sheet here. |
|
|
3.2V 15Ah LiFePO4 (Lithium Iron Phosphate) Rechargeable Battery (DGR-A) $110 3.2V 15Ah LiFePO4 Rechargeable Battery.Maximum discharge rate2C.Maximum charge current15A.Maximum burst of45A.Recommended charging rate0.3C.Dimensions(L x W x T)245mm x 82mm x 11mmWeight400 gramsMUST READ INSTRUCTIONS BEFORE USEDownload Full Specification Sheet here. |
|
|
3.2V 20Ah LiFePO4 (Lithium Iron Phosphate) Rechargeable Battery (DGR) $161.19 3.2V 20Ah LiFePO4 Rechargeable Battery.Maximum discharge rate2C.Maximum charge current20A.Maximum burst of65A.Recommended charging rate0.3C.Dimensions(L x W x T)250mm x 174mm x 7mmWeight580 gramsMUST READ INSTRUCTIONS BEFORE USEDownload Full Specification Sheet here. |
|
|
3.2V 200Ah LiFePO4 (Lithium Iron Phosphate) Rechargeable Battery (DGR) $1935 3.2V 200Ah LiFePO4 Rechargeable Battery.Maximum discharge rate2C.Maximum charge current200A.Maximum burst of600A.Recommended charging rate0.3C.Dimensions(L x W x T)183mm x 82mm x 280mmWeight6.26kg (13.8lbs)MUST READ INSTRUCTIONS BEFORE USEDownload Full Specification Sheet here. |
|
|
Tenergy LIPO 11.1V 1600mAh 20C Nunchuck Airsoft Battery Pack $69.99 Li-Polymer batteries are the newest available batteries for airsoft and other hobby toys. They are designed as a light weight, high output power source. This 11.1v Li-Po battery can deliver more power than 12v Ni-MH large type battery with only half of the size and a third of the battery cells.High capacity1600mahMini Tamiya connectorDimension103mm x 33mm x 6mm each cellWeight140g / 5oz Some compatible guns Special M4/16 "handguard rail" Full Stock full stock (M4/16, AK, M14, MP5,MKII ) Handguard ( G36 )RecommendedCheck dimensions of this pack to make sure it is similar to your current pack or fits in your battery compartment.NotePlease read instructions before using! |
|
|
Full size all wood and acrylic archival jersey display - - Pallet Only $703.99 Full size all wood and acrylic archival jersey display - - Pallet Only Full size all wood and acrylic archival jersey display - - Pallet Only |
|
|
T-9280 Portable Charger Pack (Li-Ion Power Pack) for Cell phones & Portable Devices $35.99 Features Powerup and charge digital devices such as mobile phone, iPod, iPhone, Mp3, Mp4, PDA and PSPPortable games devices.USB charging functionShort-circuit protection designLimited output current protectionOver-Charge, over-discharge protectionLED indicator forcharging status and capacity levelIncluded8 detachable DC plug for cell phone, MP3, MP4, PDA, PSP, GPS devices.Specifications:Input5VDC 500mAOutput5VDC 800mA Max.Push capacity button with greenLED indicator for battery condition-1stLED = 35% of full capacity-2nd LED = 60% of full capacity-3rd LED= 100% of full capacityBuilt-in BatteryLi-Ion 3.7V 1800mAhOperate temperature0'C - 45'CPack's dimension (LxWxH)86mm(3.4") x 51mm(2.0") x 15mm(0.6")Pack's weight:2.5 Oz (71 grams)NoteDock connector to USB Cable (NOT included) is required in order to charge any Apple device.Download product manual here.- Tenergy product is a generic product, not an original OEM product.- Apple??, iPad??, and iPhone are trademarks of Apple,Inc.- Tenergy is not associated with Apple,Inc.- Tenergy product is not subject to any warranty by Apple,Inc.Download product manual here. |
|
|
10W Step Down Adjustable Switching $29.99 Untitled DocumentProduct Description The DE-SWADJ is the adjustable version of our SW0XX step down voltage regulators.It is designed to be the easiest possible way to add an adjustable voltage source to a new or existing project with all the efficiency benefits of switch-mode power.The DE-SWADJ is pin-compatible with the common 78XX family of linear voltage regulators, and has a small screw on top that allows you change the output voltage as your project evolves.It has integrated decoupling capacitors, so external capacitors are not generally necessary.DE-SWADJ can deliver a maximum of 10 Watts. The screw potentiometer on DE-SWADJ is worm-gear driven, so small vibrations and movement will not cause the voltage to shift. Use of glue to hold the screw in place is strongly discouraged and could damage the device. Product Specs Performance Adjustable from 1.25 to 13V output using screw1A output at 1.25 to 10V (Please see datasheet for current ratings at higher voltages) >90% efficiency at >9v out1.3V typical dropout voltage at full loadCan be put in parallelWeight5.5g Applications Battery powered applications Robots Battery chargingElectronics prototyping Powering multiple servos at their max rated voltageDatasheet DE-SWADJ.doc (386kb) DE-SWADJ.pdf (126kb) |
|
|
Syma S109G Apache AH-64 3-Channels Mini Indoor Helicopter $45 Product DescriptionThe Syma S109G is a palm size 3-Channels Helicopter, it has ayoungest brother in the Syma Apache line. The S109G has a Co-Axialstructure which is specially made for first time flyers. The S109G is built with thick plastic body which always survives in crashes. The Syma S109G is equipped with a 4-in-1 receiver (Gyro, ESC,Mixer, Receiver), allows the helicopter to move in all directions. This hobbyhelicopter is designed for ages 8+.Features:Apache 3-Channels AH-64 Helicopter.It can fly in 6directions clockwise/anti-clockwise, forward/backward, & up/down.Double protection. Head lights. 3D full function. Built-in GYRO.Very strong & solid built. Durable design to survive though crashes. Compact in size.Helicopter can be charged thru computer USB socket. Includes Helicopter Remote Controller USB Charger Spare Tail Blade ManualSpecifications Fly functionsup/down, left/right, & forward/backward.Helicopter battery3.7V 55mAh Li-polymers. Controller batteries use6pcs AA batteries (not include). Charging time~ 20-30 minutes. Flying time~ 3-5 minutes. Controlling distanceabout 10 meters. Helicopter size19 x 8.5 x 7.5cm Box size48 x 18 x 8.5 cm FrequencyA/B channel selector; Infra red control systemTest reportCE ROHS FCC ASTM RangeUp to 10m (30ft) |
|
|
SANYO Li-Ion 18650 Cylindrical 3.7V 2800mAh Rechargeable Battery $16.45 SANYO Li-ion 3.7V (18650) 2800mAhSanyo Li-ion 18650 cylindrical rechargeable battery provides higher energy density with optimized electrodes design.3.7V 2800mAh high capacityHigh Battery SafetyFree from Leakage of Liquid ElectrolyteLow Battery Internal ImpedanceApplications:Building laptop battery, digital camcorder, digital camera, e-book, etc.Building portable power device that needs high energy density and low weight- Please download 18650 2800mah Technical Information.Specification Nominal CapacityMin. 2700mAhNominal Voltage3.7VCharging MethodConstant Current-Constant VoltageCharging Voltage4.3VCharging CurrentStd. 1890mACharging Time3hrs.Ambient TemperatureCharge0 ~ +40*CDischarge-20 ~ +60*CStorage-20 ~ +50*CWeight (Max.)48.0gDimensions (Max.) (D)18.24mm(H)65.10mmVolumetric Energy Density576Wh/lGravimetric Energy Density204Wh/kg WARNING CAUTIONwhen working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mishandled.Protective Circuit Board is required when making packsUser should have enough knowledge on Li-Ion rechargeable batteries in charging, discharging, and assembly before use.Put the batteries in fire-proof containerNever leave batteries unattended when chargingDo not put batteries on wood surface or carpet when chargingWe are not responsible for damage if there is any modification of the batteries in form, shape,or made into packsWe are not responsible for any damage caused by misuse or mishandling of theses Li-Ion batteries |
|
|
Li-Polymer 3.7V 1150mAh (503565) Battery $21.99 Prismatic Polymer Li-Ion Battery, 3.7V, 1150mAh (503565) SpecificationsValuesRated Capacity (mAh)1150mAh @ 0.2CModel Number503565Nominal Voltage (V)3.7Dimensions (mm)66(length) x 35(width) x5(thickness)Impedance (m-Ohm)<= 50Cell Weight (g)About 25.0 gMax. Charge Current (mA) 1150Max. Charge Voltage (V)4.2Max. Discharge Current (mA)2300Cut-off voltage (V)2.75Operation TemperatureCharge0~~+45 oCDischarge-20~~+60 oCStorage Temperature<= 1 month-10~~+35 oC>=6 month-5~~+30 PCB SelectionProtection circuis Module ( PCB ) for 3.7V Li-Polymer Battery (8.5A limit)oCCautions Be careful when working with Li-ion cells - they are very sensitive to charging characteristics and may explode if mis-handled.User should have enough knowledge about Li-ion rechargeable batteries before charging, discharging and assemble.We are not responsible for any damage caused by misuse or mishandling of these Li-ion batteries.DO NOT leave battery un-attended during charging - please keep out of children's reach.DO NOT put batteries on wood surface, carpet, or near flammable materials while charging. |
|
|
Li-Polymer 3.7V 240mAh (602025) Battery $10.99 Prismatic Polymer Li-Ion Battery, 3.7V, 240mAh (602025) for RC Car and RC Plane or Micro Device SpecificationsValues Rated Capacity (mAh) 240mAhModel Number 602025 Nominal Voltage (V) 3.7 Dimensions (mm) 25(length) x 20(width) x6(thickness)Impedance (m-Ohm) <= 50Cell Weight (g)4.6 gMax. Charge Current 1 CMax. Charge Voltage (V) 4.2 Max. Discharge Current1C Cut-off voltage (V) 2.75 Operation Temperature Charge 0~+45 oC Discharge -20~+60 oC Storage Temperature <= 1 month-10~+35 oC >=6 month-5~+30 oC Cautions CAUTIONwhen working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled. User should have enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use. We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteries Don't leave battery unattended during charging Don't put battery on wood surface or carpet or near flammable materials during chargingDownload data sheet here. |
|
|
Tenergy Intelligent 2.5A Charger for 18.5V 5S Li-ion / Li-Polymer Battery Pack $49.99 SpecificationInput 100V-240V /50-60Hz AC PowerStandard USA AC power plug. For other country's Plug adapters, click herePatented 4 Stage charge algorithm guarantee 100% Protection (check the Datasheet for details) Automatic change 5S 18.5V Li-Po/Li-ion battery from any status.Output voltage12.0 V DC ~ 24.0V DCBattery capacity extend2Ah ~ 30AhNumber of cells5 Li-ion / Li-Polymer cells in seriesCharge current2.5A 0.1AMax. delivered power52.5WRated AC input100~240VAC 50/60HzInput voltage90~264VACRated input current0.40ArmsMax. input power62.5WDimension148mm x 78mm x 43mmWeight535gAccessories IncludedPremium metallic 3 pin connector (positive, null, negative)1 standard Tamiya Female connector.Alligator clips red + black.CautionThe charger is designed for indoor use only. Don't leave the charger unattended during charging.The Charger should be positionedhorizontally and work in well ventilated condition, avoid water andkeep away from flammable explosive goods. Don't cover the charger when charging, ambient temperature shall not be more than 40oCDon't touch the plug. Don't leave the batteries and chargers on wood surface or carpet.Cut off the power supply before connect or disconnect the charger with batteries. Don't try to disassemble the charger, High voltage inside, danger!Download product manual here. |
|
|
1 Card: Tenergy Centura NiMH C 4000mAh Low Self Discharge Rechargeable Batteries $18.99 .R1 {color#900;}Why Tenergy Low Self-Discharge (LSD) Battery ?Tenergy Low Self-Discharge (LSD) NiMH Battery is a combination of a rechargeable and a disposable battery, the next evolutionary step for batteries into the 21st century. Because the Tenergy Low Self-Discharge (LSD) Battery has a very low self-discharge, battery loses its charge very slowly. Low self-dischargeWhat makes the Tenergy Low Self-Discharge (LSD) Battery unique? The key-advantage of the Tenergy Low Self-Discharge (LSD) Battery compared to usual rechargeable batteries is its extremely low self-discharge.Once charged, Tenergy Low Self-Discharge (LSD) Battery keeps its charge even if you store it for 12 or 24 months. ( 85 percent of the charge after 12 months, 70 percent after 24 months ). For a rechargeable battery this is a revolutionary advantage. No more worries about the state of charge of your battery. Just, charge them and keep them. Even after months you will still have an almost full battery. Long Battery Cycle LifeIn contrast to a disposable battery, the Tenergy Low Self-Discharge (LSD) Battery can be used over hundreds of times. This saves the environment and your purse. Thus one Tenergy Low Self-Discharge (LSD) Battery saves the waste of 999 disposable batteries. But also financially the Tenergy Low Self-Discharge (LSD) Battery has benefits. Even if you consider the slightly higher cost of the Tenergy Low Self-Discharge (LSD) Battery compared to a disposable battery and add the cost for the charger and the energy consumed by the charger, the investment for one Tenergy Low Self-Discharge (LSD) Battery returns easily after a few charging cycles. Imagine how much money you have spent for batteries in your life. Now there is an end to this spending. Broad Application Tenergy Low Self-Discharge (LSD) Battery - the only battery you will ever need, One battery for all applications. Tenergy Low Self-Discharge (LSD) Battery is the right battery for all your applications. It replaces disposable batteries in Remote controls,CamerasClocks and alarm-clocksElectric torches,Radios,LCD-TVsToothbrushesShaversFlashlightsToys,MP3-PlayersElectronic gamesComputer-keyboards und mice. Tenergy Low Self-Discharge (LSD) Battery-Excellent performance for your digicam With Tenergy Low Self-Discharge (LSD) Battery you can make substantially more shots with your digital camera than with any other disposable battery. The main advantages of NiMH rechargeable batteries exist also in the Tenergy Low Self-Discharge (LSD) Battery apr. 4 time more shots than with alkaline batteries high performance even at low temperatures down to -10 C during your winter vacation rechargeable and therefore cheaper on the long run. Charging made easy With normal rechargeable batteries it made sense to charge them just before you wanted to use them. Too much risk otherwise, that the battery did not provide full power, when needed.Tenergy Low Self-Discharge (LSD) NiMH Battery is compatible with all of Ten |
|
|
1 Card: Tenergy Centura NiMH AAA 800mAh Low Self Discharge Rechargeable Batteries $11.99 .R1 {color#900;}Why Tenergy Low Self-Discharge (LSD) Battery ?Tenergy Low Self-Discharge (LSD) NiMH Battery is a combination of a rechargeable and a disposable battery, the next evolutionary step for batteries into the 21st century. Because the Tenergy Low Self-Discharge (LSD) Battery has a very low self-discharge, battery loses its charge very slowly. Low self-dischargeWhat makes the Tenergy Low Self-Discharge (LSD) Battery unique? The key-advantage of the Tenergy Low Self-Discharge (LSD) Battery compared to usual rechargeable batteries is its extremely low self-discharge.Once charged, Tenergy Low Self-Discharge (LSD) Battery keeps its charge even if you store it for 12 or 24 months. ( 85 percent of the charge after 12 months, 70 percent after 24 months ). For a rechargeable battery this is a revolutionary advantage. No more worries about the state of charge of your battery. Just, charge them and keep them. Even after months you will still have an almost full battery. Long Battery Cycle LifeIn contrast to a disposable battery, the Tenergy Low Self-Discharge (LSD) Battery can be used over hundreds of times. This saves the environment and your purse. Thus one Tenergy Low Self-Discharge (LSD) Battery saves the waste of 999 disposable batteries. But also financially the Tenergy Low Self-Discharge (LSD) Battery has benefits. Even if you consider the slightly higher cost of the Tenergy Low Self-Discharge (LSD) Battery compared to a disposable battery and add the cost for the charger and the energy consumed by the charger, the investment for one Tenergy Low Self-Discharge (LSD) Battery returns easily after a few charging cycles. Imagine how much money you have spent for batteries in your life. Now there is an end to this spending. Broad Application Tenergy Low Self-Discharge (LSD) Battery - the only battery you will ever need, One battery for all applications. Tenergy Low Self-Discharge (LSD) Battery is the right battery for all your applications. It replaces disposable batteries in Remote controls,CamerasClocks and alarm-clocksElectric torches,Radios,LCD-TVsToothbrushesShaversFlashlightsToys,MP3-PlayersElectronic gamesComputer-keyboards und mice. Tenergy Low Self-Discharge (LSD) Battery-Excellent performance for your digicam With Tenergy Low Self-Discharge (LSD) Battery you can make substantially more shots with your digital camera than with any other disposable battery. The main advantages of NiMH rechargeable batteries exist also in the Tenergy Low Self-Discharge (LSD) Battery apr. 4 time more shots than with alkaline batteries high performance even at low temperatures down to -10 C during your winter vacation rechargeable and therefore cheaper on the long run. Charging made easy With normal rechargeable batteries it made sense to charge them just before you wanted to use them. Too much risk otherwise, that the battery did not provide full power, when needed.Tenergy Low Self-Discharge (LSD) NiMH Battery is compatible with all of Ten |
|
|
1 Card: Tenergy Centura NiMH D 8000mAh Low Self Discharge Rechargeable Batteries $32.99 .R1 {color#900;}Why Tenergy Low Self-Discharge (LSD) Battery ?Tenergy Low Self-Discharge (LSD) NiMH Battery is a combination of a rechargeable and a disposable battery, the next evolutionary step for batteries into the 21st century. Because the Tenergy Low Self-Discharge (LSD) Battery has a very low self-discharge, battery loses its charge very slowly. Low self-dischargeWhat makes the Tenergy Low Self-Discharge (LSD) Battery unique? The key-advantage of the Tenergy Low Self-Discharge (LSD) Battery compared to usual rechargeable batteries is its extremely low self-discharge.Once charged, Tenergy Low Self-Discharge (LSD) Battery keeps its charge even if you store it for 12 or 24 months. ( 85 percent of the charge after 12 months, 70 percent after 24 months ). For a rechargeable battery this is a revolutionary advantage. No more worries about the state of charge of your battery. Just, charge them and keep them. Even after months you will still have an almost full battery. Long Battery Cycle LifeIn contrast to a disposable battery, the Tenergy Low Self-Discharge (LSD) Battery can be used over hundreds of times. This saves the environment and your purse. Thus one Tenergy Low Self-Discharge (LSD) Battery saves the waste of 999 disposable batteries. But also financially the Tenergy Low Self-Discharge (LSD) Battery has benefits. Even if you consider the slightly higher cost of the Tenergy Low Self-Discharge (LSD) Battery compared to a disposable battery and add the cost for the charger and the energy consumed by the charger, the investment for one Tenergy Low Self-Discharge (LSD) Battery returns easily after a few charging cycles. Imagine how much money you have spent for batteries in your life. Now there is an end to this spending. Broad Application Tenergy Low Self-Discharge (LSD) Battery - the only battery you will ever need, One battery for all applications. Tenergy Low Self-Discharge (LSD) Battery is the right battery for all your applications. It replaces disposable batteries in Remote controls,Clocks and alarm-clocksElectric torches,Radios,FlashlightsToys,Electronic gamesTenergy Low Self-Discharge (LSD) Battery-Excellent performance for your digicam With Tenergy Low Self-Discharge (LSD) Battery you can make substantially more shots with your digital camera than with any other disposable battery. The main advantages of NiMH rechargeable batteries exist also in the Tenergy Low Self-Discharge (LSD) Battery apr. 4 time more shots than with alkaline batteries high performance even at low temperatures down to -10 C during your winter vacation rechargeable and therefore cheaper on the long run. Charging made easy With normal rechargeable batteries it made sense to charge them just before you wanted to use them. Too much risk otherwise, that the battery did not provide full power, when needed.Tenergy Low Self-Discharge (LSD) NiMH Battery is compatible with all of Tenergy Smart Chargers High quality D Size 8000mAh rechargeable Nickel Metal |
|
|
Combo: Tenergy TB6B Balance Charger for NiMH/NiCD/Li-PO/Li-Fe Battery Packs + Power Supply $99.99 The Best ALL-IN-One Universal Charger in the Market Tenergy "Octopus" Multi Charging Harness Also Included ($10.99 value added FREE!)Supports the following connector types TraxxasTamiyaMini Tamiya (for Airsoft packs) JSTHitec EC3 DeansSupports MULTIPLE types of battery packs with one single charger! The follow packs are supported NiMH/NiCD 1~15 cells ( 1.2v to 18v) Li-PO/Lithium Ion 1~6 series ( 3.7v to 22.2v) Li-Fe 1~6 series Sealed Lead Acid (SLA) What does it mean for an RC Car/Helicopter or Airsoft Hobbyist? Charge yourNiMH/NiCD Receiver Packs3.6v, 4.8v, 6v, or 9.6vCharge your LiFE Packs3.2v - 19.2vCharge your normal NiMH/NICD Packs7.2v, 8.4v, 9.6v, 10.8v, 12vCharge your High Performance LIPO Packs7.4v, 11.1v, 14.8v, 18.5vCharge your Airsoft NiMH/NICD Packs8.4v, 9.6v, 12vCharge your Airsoft LIPO/LiFe Packs *NotePack voltages above are samples of the more popular hobby packs. See bottom chart for full Chemistry and Voltage support. One single TB6b supports all these battery packs. PLUS! It will balance your expensive LiFe & LIPO packs to ensure longer cycle and battery life.Future proof yourself for any new battery pack or upgrades, instead of having contantly buy 1 charger for each type of pack.What does it mean for a custom pack builder? Endless fun and charging capabilities - you have an All-in-One charger for any kind of pack idea you have! Charger Specifications Handle NiMH, NICD, Li-Po,Li-ion, Li-Fe, SLA Batteries. Easy to Read LCDBuilt-in Balancer DC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit. Specification Operating voltage DC 11~18 volts AC 100~240V, 50/60Hz (AC Adapter) Charge/discharge powermax. 50/5 WattsNiCd/MH 1~15 cellsLiIo/LiPo/LiFe 1~6 series Pb2~20VCharge current0.1 to 5.0ADischarg current0.1 to 1.0ANo. of cycle1 to 5 times Battery data memory up to 5 data Weight246gDimension130x85x33 mmUser's setting-up parametersBattery voltage typeLiIo:3.6V, LiPo:3.7V, LiFe:3.2VNiCd Delta-peak voltage sensitivity1 to 20mVNiMH Delta-peak voltage sensitivity1 to 20mVBattery temperature cut-off20 to 80C or OFFWaiting time between charge/discharge1 to 60 min. Integral timer limit for safety10 to 720 min.or OFFMaximum charging capacity limit for safety10 to 9990mAh or OFFKey beep and buzzer soundON/OFFInput DC power low alert10 to 11VOptimized operating softwareWhen charging or discharging, TB6B has an 'AUTO' function that sets the feeding current or the cell count of the battery automatically. Especially for Li-ion/Li-Polymer batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at users option. Individual voltage balancer for Li-ion/Li-Polymer batteries inside TB6B has |
|
|
1 Card: Tenergy Centura NiMH AA 2000mAh Low Self Discharge Rechargeable Batteries $14.99 .R1 {color#900;}Why Tenergy Low Self-Discharge (LSD) Battery ?Tenergy Low Self-Discharge (LSD) NiMH Battery is a combination of a rechargeable and a disposable battery, the next evolutionary step for batteries into the 21st century. Because the Tenergy Low Self-Discharge (LSD) Battery has a very low self-discharge, battery loses its charge very slowly. Low self-dischargeWhat makes the Tenergy Low Self-Discharge (LSD) Battery unique? The key-advantage of the Tenergy Low Self-Discharge (LSD) Battery compared to usual rechargeable batteries is its extremely low self-discharge.Once charged, Tenergy Low Self-Discharge (LSD) Battery keeps its charge even if you store it for 12 or 24 months. ( 85 percent of the charge after 12 months, 70 percent after 24 months ). For a rechargeable battery this is a revolutionary advantage. No more worries about the state of charge of your battery. Just, charge them and keep them. Even after months you will still have an almost full battery. Long Battery Cycle LifeIn contrast to a disposable battery, the Tenergy Low Self-Discharge (LSD) Battery can be used over hundreds of times. This saves the environment and your purse. Thus one Tenergy Low Self-Discharge (LSD) Battery saves the waste of 999 disposable batteries. But also financially the Tenergy Low Self-Discharge (LSD) Battery has benefits. Even if you consider the slightly higher cost of the Tenergy Low Self-Discharge (LSD) Battery compared to a disposable battery and add the cost for the charger and the energy consumed by the charger, the investment for one Tenergy Low Self-Discharge (LSD) Battery returns easily after a few charging cycles. Imagine how much money you have spent for batteries in your life. Now there is an end to this spending. Broad Application Tenergy Low Self-Discharge (LSD) Battery - the only battery you will ever need, One battery for all applications. Tenergy Low Self-Discharge (LSD) Battery is the right battery for all your applications. It replaces disposable batteries in Remote controls,CamerasClocks and alarm-clocksElectric torches,Radios,LCD-TVsToothbrushesShaversFlashlightsToys,MP3-PlayersElectronic gamesComputer-keyboards und mice. Tenergy Low Self-Discharge (LSD) Battery-Excellent performance for your digicam With Tenergy Low Self-Discharge (LSD) Battery you can make substantially more shots with your digital camera than with any other disposable battery. The main advantages of NiMH rechargeable batteries exist also in the Tenergy Low Self-Discharge (LSD) Battery apr. 4 time more shots than with alkaline batteries high performance even at low temperatures down to -10 C during your winter vacation rechargeable and therefore cheaper on the long runCharging made easy With normal rechargeable batteries it made sense to charge them just before you wanted to use them. Too much risk otherwise, that the battery did not provide full power, when needed.Tenergy Low Self-Discharge (LSD) NiMH Battery is compatible with all of Tenerg |
|
|
3 Cards: Tenergy Centura NiMH AAA 800mAh Low Self Discharge Rechargeable Batteries $29.99 .R1 {color#900;}Why Tenergy Low Self-Discharge (LSD) Battery ?Tenergy Low Self-Discharge (LSD) NiMH Battery is a combination of a rechargeable and a disposable battery, the next evolutionary step for batteries into the 21st century. Because the Tenergy Low Self-Discharge (LSD) Battery has a very low self-discharge, battery loses its charge very slowly. Low self-dischargeWhat makes the Tenergy Low Self-Discharge (LSD) Battery unique? The key-advantage of the Tenergy Low Self-Discharge (LSD) Battery compared to usual rechargeable batteries is its extremely low self-discharge.Once charged, Tenergy Low Self-Discharge (LSD) Battery keeps its charge even if you store it for 12 or 24 months. ( 85 percent of the charge after 12 months, 70 percent after 24 months ). For a rechargeable battery this is a revolutionary advantage. No more worries about the state of charge of your battery. Just, charge them and keep them. Even after months you will still have an almost full battery. Long Battery Cycle LifeIn contrast to a disposable battery, the Tenergy Low Self-Discharge (LSD) Battery can be used over hundreds of times. This saves the environment and your purse. Thus one Tenergy Low Self-Discharge (LSD) Battery saves the waste of 999 disposable batteries. But also financially the Tenergy Low Self-Discharge (LSD) Battery has benefits. Even if you consider the slightly higher cost of the Tenergy Low Self-Discharge (LSD) Battery compared to a disposable battery and add the cost for the charger and the energy consumed by the charger, the investment for one Tenergy Low Self-Discharge (LSD) Battery returns easily after a few charging cycles. Imagine how much money you have spent for batteries in your life. Now there is an end to this spending. Broad Application Tenergy Low Self-Discharge (LSD) Battery - the only battery you will ever need, One battery for all applications. Tenergy Low Self-Discharge (LSD) Battery is the right battery for all your applications. It replaces disposable batteries in Remote controls,CamerasClocks and alarm-clocksElectric torches,Radios,LCD-TVsToothbrushesShaversFlashlightsToys,MP3-PlayersElectronic gamesComputer-keyboards und mice. Tenergy Low Self-Discharge (LSD) Battery-Excellent performance for your digicam With Tenergy Low Self-Discharge (LSD) Battery you can make substantially more shots with your digital camera than with any other disposable battery. The main advantages of NiMH rechargeable batteries exist also in the Tenergy Low Self-Discharge (LSD) Battery apr. 4 time more shots than with alkaline batteries high performance even at low temperatures down to -10 C during your winter vacation rechargeable and therefore cheaper on the long run. Charging made easy With normal rechargeable batteries it made sense to charge them just before you wanted to use them. Too much risk otherwise, that the battery did not provide full power, when needed.Tenergy Low Self-Discharge (LSD) NiMH Battery is compatible with all of Ten |
|
|
6 Cards: Tenergy Centura NiMH AAA 800mAh Low Self Discharge Rechargeable Batteries $59.99 .R1 {color#900;}Why Tenergy Low Self-Discharge (LSD) Battery ?Tenergy Low Self-Discharge (LSD) NiMH Battery is a combination of a rechargeable and a disposable battery, the next evolutionary step for batteries into the 21st century. Because the Tenergy Low Self-Discharge (LSD) Battery has a very low self-discharge, battery loses its charge very slowly. Low self-dischargeWhat makes the Tenergy Low Self-Discharge (LSD) Battery unique? The key-advantage of the Tenergy Low Self-Discharge (LSD) Battery compared to usual rechargeable batteries is its extremely low self-discharge.Once charged, Tenergy Low Self-Discharge (LSD) Battery keeps its charge even if you store it for 12 or 24 months. ( 85 percent of the charge after 12 months, 70 percent after 24 months ). For a rechargeable battery this is a revolutionary advantage. No more worries about the state of charge of your battery. Just, charge them and keep them. Even after months you will still have an almost full battery. Long Battery Cycle LifeIn contrast to a disposable battery, the Tenergy Low Self-Discharge (LSD) Battery can be used over hundreds of times. This saves the environment and your purse. Thus one Tenergy Low Self-Discharge (LSD) Battery saves the waste of 999 disposable batteries. But also financially the Tenergy Low Self-Discharge (LSD) Battery has benefits. Even if you consider the slightly higher cost of the Tenergy Low Self-Discharge (LSD) Battery compared to a disposable battery and add the cost for the charger and the energy consumed by the charger, the investment for one Tenergy Low Self-Discharge (LSD) Battery returns easily after a few charging cycles. Imagine how much money you have spent for batteries in your life. Now there is an end to this spending. Broad Application Tenergy Low Self-Discharge (LSD) Battery - the only battery you will ever need, One battery for all applications. Tenergy Low Self-Discharge (LSD) Battery is the right battery for all your applications. It replaces disposable batteries in Remote controls,CamerasClocks and alarm-clocksElectric torches,Radios,LCD-TVsToothbrushesShaversFlashlightsToys,MP3-PlayersElectronic gamesComputer-keyboards und mice. Tenergy Low Self-Discharge (LSD) Battery-Excellent performance for your digicam With Tenergy Low Self-Discharge (LSD) Battery you can make substantially more shots with your digital camera than with any other disposable battery. The main advantages of NiMH rechargeable batteries exist also in the Tenergy Low Self-Discharge (LSD) Battery apr. 4 time more shots than with alkaline batteries high performance even at low temperatures down to -10 C during your winter vacation rechargeable and therefore cheaper on the long run. Charging made easy With normal rechargeable batteries it made sense to charge them just before you wanted to use them. Too much risk otherwise, that the battery did not provide full power, when needed.Tenergy Low Self-Discharge (LSD) NiMH Battery is compatible with all of Ten |
|
|
3 Cards: Tenergy Centura NiMH AA 2000mAh Low Self Discharge Rechargeable Batteries $39.99 .R1 {color#900;}Why Tenergy Low Self-Discharge (LSD) Battery ?Tenergy Low Self-Discharge (LSD) NiMH Battery is a combination of a rechargeable and a disposable battery, the next evolutionary step for batteries into the 21st century. Because the Tenergy Low Self-Discharge (LSD) Battery has a very low self-discharge, battery loses its charge very slowly. Low self-dischargeWhat makes the Tenergy Low Self-Discharge (LSD) Battery unique? The key-advantage of the Tenergy Low Self-Discharge (LSD) Battery compared to usual rechargeable batteries is its extremely low self-discharge.Once charged, Tenergy Low Self-Discharge (LSD) Battery keeps its charge even if you store it for 12 or 24 months. ( 85 percent of the charge after 12 months, 70 percent after 24 months ). For a rechargeable battery this is a revolutionary advantage. No more worries about the state of charge of your battery. Just, charge them and keep them. Even after months you will still have an almost full battery. Long Battery Cycle LifeIn contrast to a disposable battery, the Tenergy Low Self-Discharge (LSD) Battery can be used over hundreds of times. This saves the environment and your purse. Thus one Tenergy Low Self-Discharge (LSD) Battery saves the waste of 999 disposable batteries. But also financially the Tenergy Low Self-Discharge (LSD) Battery has benefits. Even if you consider the slightly higher cost of the Tenergy Low Self-Discharge (LSD) Battery compared to a disposable battery and add the cost for the charger and the energy consumed by the charger, the investment for one Tenergy Low Self-Discharge (LSD) Battery returns easily after a few charging cycles. Imagine how much money you have spent for batteries in your life. Now there is an end to this spending. Broad Application Tenergy Low Self-Discharge (LSD) Battery - the only battery you will ever need, One battery for all applications. Tenergy Low Self-Discharge (LSD) Battery is the right battery for all your applications. It replaces disposable batteries in Remote controls,CamerasClocks and alarm-clocksElectric torches,Radios,LCD-TVsToothbrushesShaversFlashlightsToys,MP3-PlayersElectronic gamesComputer-keyboards und mice. Tenergy Low Self-Discharge (LSD) Battery-Excellent performance for your digicam With Tenergy Low Self-Discharge (LSD) Battery you can make substantially more shots with your digital camera than with any other disposable battery. The main advantages of NiMH rechargeable batteries exist also in the Tenergy Low Self-Discharge (LSD) Battery apr. 4 time more shots than with alkaline batteries high performance even at low temperatures down to -10 C during your winter vacation rechargeable and therefore cheaper on the long run. Charging made easy With normal rechargeable batteries it made sense to charge them just before you wanted to use them. Too much risk otherwise, that the battery did not provide full power, when needed.Tenergy Low Self-Discharge (LSD) NiMH Battery is compatible with all of Ten |
|
|
6 Cards: Tenergy Centura NiMH AA 2000mAh Low Self Discharge Rechargeable Batteries $69.99 .R1 {color#900;}Why Tenergy Low Self-Discharge (LSD) Battery ?Tenergy Low Self-Discharge (LSD) NiMH Battery is a combination of a rechargeable and a disposable battery, the next evolutionary step for batteries into the 21st century. Because the Tenergy Low Self-Discharge (LSD) Battery has a very low self-discharge, battery loses its charge very slowly. Low self-dischargeWhat makes the Tenergy Low Self-Discharge (LSD) Battery unique? The key-advantage of the Tenergy Low Self-Discharge (LSD) Battery compared to usual rechargeable batteries is its extremely low self-discharge.Once charged, Tenergy Low Self-Discharge (LSD) Battery keeps its charge even if you store it for 12 or 24 months. ( 85 percent of the charge after 12 months, 70 percent after 24 months ). For a rechargeable battery this is a revolutionary advantage. No more worries about the state of charge of your battery. Just, charge them and keep them. Even after months you will still have an almost full battery. Long Battery Cycle LifeIn contrast to a disposable battery, the Tenergy Low Self-Discharge (LSD) Battery can be used over hundreds of times. This saves the environment and your purse. Thus one Tenergy Low Self-Discharge (LSD) Battery saves the waste of 999 disposable batteries. But also financially the Tenergy Low Self-Discharge (LSD) Battery has benefits. Even if you consider the slightly higher cost of the Tenergy Low Self-Discharge (LSD) Battery compared to a disposable battery and add the cost for the charger and the energy consumed by the charger, the investment for one Tenergy Low Self-Discharge (LSD) Battery returns easily after a few charging cycles. Imagine how much money you have spent for batteries in your life. Now there is an end to this spending. Broad Application Tenergy Low Self-Discharge (LSD) Battery - the only battery you will ever need, One battery for all applications. Tenergy Low Self-Discharge (LSD) Battery is the right battery for all your applications. It replaces disposable batteries in Remote controls,CamerasClocks and alarm-clocksElectric torches,Radios,LCD-TVsToothbrushesShaversFlashlightsToys,MP3-PlayersElectronic gamesComputer-keyboards und mice. Tenergy Low Self-Discharge (LSD) Battery-Excellent performance for your digicam With Tenergy Low Self-Discharge (LSD) Battery you can make substantially more shots with your digital camera than with any other disposable battery. The main advantages of NiMH rechargeable batteries exist also in the Tenergy Low Self-Discharge (LSD) Battery apr. 4 time more shots than with alkaline batteries high performance even at low temperatures down to -10 C during your winter vacation rechargeable and therefore cheaper on the long run. Charging made easy With normal rechargeable batteries it made sense to charge them just before you wanted to use them. Too much risk otherwise, that the battery did not provide full power, when needed.Tenergy Low Self-Discharge (LSD) NiMH Battery is compatible with all of Ten |
|
|
Card: Tenergy 4 Pcs RCR123A 3.0V 900mAh Rechargeable Li-Ion Protected Batteries w/ Smart Charger $49.99 Charger Features Higher capacity for longer running time in your devices.Worldwide usage. Auto AC power adjust from 100-240V.Smart, build-in microprocessor automatically switch off when batteries are fully charged.Safe, build-in IC provides various protection, Thermal protection, Overcharge protection, Short-circuit protection, mechanical. and electrical protection against reversal polarity, and auto defective battery identification.Convenient, 12V car cigarette lighter plug for on the road charging.Compact ( 2.5 x 4 x 1 inch ), Light weight ( 5 oz only ), include charger and all accessories.Charge 1 to 2 RCR123A from 1.5 hours to 3 hours. RCR123A Features Rechargeable CR123A Li-Ion Batteries with 3.0V working voltage. Fully protected against over-charge, over-discharge, over-current and short-circuit.Tenergy RCR123A can be recharged up to 1000 times. 1 RCR123A Li-ion = 1000 CR123A Primary CellsReplace the most of non-rechargeable CR123A primary Lithium battery for a digital cameras and flashlightModified Voltage to achieve 3.2v at full voltage; once loaded, cell voltage drops to 3.0v.Internal over-charge and over-discharge protection to prevent battery over use. The current will be shut off when the battery voltage drops below 2.5V. Capacity Nominal600mAhMaximum:900 mAh Internal Voltage Regulators.Dimension16 D x 34 H mm. (The height 34mm includes the button top).Weight17 g or 0.6 Oz.Tenergy Li-Ion RCR123A 900mah batteries reach more than 3.0v at full charge. These cells should only be used in high quality CREE LED flashlights. Do not use in incandescent bulb flashlights! * NOT COMPATIBLE WITH SUREFIRE FLASHLIGHTS. Can replace the disposable (one-time use) version of CR123A Lithium Primary Batteries. CR123A Also Known As:123, 123A, 123-SANYO, 5018LC, 6205, BR2/3A, CR123, CR123-2, CR123-A, CR123A, CR123A-2, CR123R, CR-123, CR17335, CR17345, DL123, DL123A, DL123A2, DL123AB, DL-123, DL-123AB, DLCR123, EL123, EL123A, EL123AP, EL123-AP, EL123AP2, EL123AP-2, K123, K123A, K123LA, K123LA-1, L123A, PL123, PR123-1, PR123-2, PRCR123-1, PRCR123-2, RL123A, RL123A-1, RL123A-2, SF123, SF123A, SF123A1, ULCR123R, VL123, VL123A Compatible Camera Equipment:AnscoCanonEdixaGraflexJazzKonicaMaxellPrakticaSamsungVartaArgusCarenaEternacellHakingJenoptikKonica MinoltaMinoltaPremierSigmaVivitarBell & HowellChinonExaktaHanimexKalimarLEDPanasonicRadio ShackSmyangVoigtlanderBootsConcordFujifilmHorsemanKinonLeicaPlatonRicohSoligorYashicaBraunContaxGokoHyundaiKodakLenmarPolaroidRolleiToshibaOther Compatible Devices LED Flashlights (such as Olight, ITP, etc)Electronic CigarettesDog CollarsLasersNot compatible with Surefire and other brands of incandescent(halogen, krypton, xenon, etc) flashlights. |
|
|
6V 1.2AH (LP6-1.2) Maintenance-free Sealed Lead Acid (SLA) Battery $24.99 Product Description6 Volt 1.2Ah Sealed Lead Acid Rechargeable Battery - valve regulated, which fixes the acid electrolyte in absorptive fiberglass. Product is designed to be used in close proximity with people and sensitive equipment.Features:6 Volt 1.2Ah Sealed Lead Acid Rechargeable Battery. Popular for multiple purpose applications. Ease of use - battery are easily replaced. Maintenance free from battery storage. Use ABS plastic shell and valve technology. Specially designed with safe and secure features.Great for emergency backup power supplies. Comply with environmentally friendly requirement. Long service life-cycle. Battery comes with full power straight from the factory.No memory effect - no need to discharge and recharge battery. Applications All Purpose Uninterruptable Power Supply (UPS) Electric Power System (EPS) Emergency backup power supplyEmergency lightRailway signal Aircraft signal Alarm and security system Electronic apparatus and equipment Communication power supply DC power supply Auto control systemSpecifications Nominal Voltage6VNominal Capacity (20HR)1.2AHDimensionLength97??1mm (3.82 inches)Width24??1mm (0.94 inches)Container Height51.5??1mm (2.03 inches)Total Height (w/ Terminal)57.5??1mm (2.26 inches)Approx. Weight0.28kg (0.62lbs)TerminalT1Container MaterialABSRated Capacity1.20 AH/0.060A20hr,1.8V/cell,25C/77F1.12 AH/0.112A10hr,1.8V/cell,25C/77F1.02 AH/0.204A5hr,1.75V/cell,25C/77F0.918 AH/0.306A3hr,1.75V/cell,25C/77F0.754 AH/0.754A1hr,1.60V/cell,25C/77FMax. Discharge Current18A (5s)Internal ResistanceApprox. 65mOperating Temp. RangeDischarge-15~50C (5~120F)Charge0~40C (5~104F)Storage-15~40C (5~104F)Nominal Operating Temp. Range25??3C (77??5F)Cycle UseInitial Charging Current less than 0.36A. Voltage 7.2V~7.5V at 25 C (77F) Temp. Coefficient -15mV/CStandby UseNo limit on Initial Charging Current Voltage 6.75V~6.9V at 25C(77F) Temp. Coefficient -10mV/CCapacity affected by Temperature40C (104F)103%25C (77F)100%0C (32F)86%Self DischargeTenergy LP series batteries may be stored for up to 6 months at 25C(77F) and then a freshening charge is required. For higher temperatures the time interval will be shorter. |
|
|
6V 7.0AH (LP6-7.0) Maintenance-free Sealed Lead Acid (SLA) Battery $36.99 Product Description6 Volt 7.0Ah Sealed Lead Acid Rechargeable Battery - valve regulated, which fixes the acid electrolyte in absorptive fiberglass. Product is designed to be used in close proximity with people and sensitive equipment.Features:6 Volt 7.0Ah Sealed Lead Acid Rechargeable Battery. Popular for multiple purpose applications. Ease of use - battery are easily replaced. Maintenance free from battery storage. Use ABS plastic shell and valve technology. Specially designed with safe and secure features.Great for emergency backup power supplies. Comply with environmentally friendly requirement. Long service life-cycle. Battery comes with full power straight from the factory.No memory effect - no need to discharge and recharge battery. Applications All purpose Uninterruptable Power Supply (UPS) Electric Power System (EPS) Emergency backup power supplyEmergency lightRailway signal Aircraft signal Alarm and security system Electronic apparatus and equipment Communication power supply DC power supply Auto control systemSpecifications Nominal Voltage6VNominal Capacity (20HR)7.0AHDimensionLength151??1mm (5.94 inches)Width34??1mm (1.34 inches)Container Height94??1mm (3.70 inches)Total Height (w/ Terminal)100??1mm (3.94 inches)Approx. Weight1.15kg (2.54lbs)TerminalT1Container MaterialABSRated Capacity7.00 AH/0.350A20hr,1.8V/cell,25C/77F6.51 AH/0.651A10hr,1.8V/cell,25C/77F5.95 AH/1.19A5hr,1.75V/cell,25C/77F5.37 AH/1.79A3hr,1.75V/cell,25C/77F4.40 AH/4.40A1hr,1.60V/cell,25C/77FMax. Discharge Current105A (5s)Internal ResistanceApprox. 15mOperating Temp. RangeDischarge-15~50C (5~120F)Charge0~40C (5~104F)Storage-15~40C (5~104F)Nominal Operating Temp. Range25??3C (77??5F)Cycle UseInitial Charging Current less than 2.1A. Voltage 7.2V~7.5V at 25 C (77F) Temp. Coefficient -15mV/CStandby UseNo limit on Initial Charging Current Voltage 6.75V~6.9V at 25C(77F) Temp. Coefficient -10mV/CCapacity affected by Temperature40C (104F)103%25C (77F)100%0C (32F)86%Self DischargeTenergy LP series batteries may be stored for up to 6 months at 25C(77F) and then a freshening charge is required. For higher temperatures the time interval will be shorter. |
|
|
Tenergy Smart Charger for 8.4V-9.6V NiMH Airsoft & RC Battery Packs w/ Mini Tamiya Connector + Standard Tamiya Adapter (#80017) $16.99 Popular for mini Airsoft NiMH Battery Packs. Now Compatible for 8.4v/9.6v Large Flat Packs with Included Mini Female to Standard Male Connector!All-around charging solution for anyone who Airsofts.Awesome price, great charging time, and Smart Charging capabilities (so you don't have to guess when the battery pack is full).Not limited to just Airsoft -- use it for any 8.4v or 9.6v NiMH Battery Packs that are used in RC Cars/Airplanes. Just make sure connector is Standard or Mini Tamiya! Smart Charger for NiMH battery packs of 8.4V-9.6V (7-8 cells). Please use the charger for battery packs with capacity of 1100-1600mAh or Higher. Able to auto distinguish bad battery and indicate malfunction. Able to activate over-discharged cells. Current ram-up way benefits cell capacity and life cycle. Unique test mode guarantees high quality. Automatically stop when battery pack is fully charged by Delta Peak detection. Short circuit & reverse polarity protections. Compact battery pack charger with LED. Built in mini male tamiya connector (charger side). UL CertifiedIncludes Smart AC Charger for 8.4 - 9.6V NiMH Battery Pack. Instruction Manual. Packaged in box. Specifications Rating Input Voltage100~240V AC 50/60HzRating input current2AmpInput power<11WOutput voltage Rating8.4V/9.6V VDC Output voltage range 7V DC~12DCCharge Current600+_60mATrickle Current 200+_20mAMax Output Power7.3WOperating Temperature-10~30*C (UL Certification) Charging Temperature<60CStorage Temperature -30~85*CMaximal -Delta V 5mV/cellCell Voltage <1.56V/cellOperating Humidity<90% RH |
|
|
Tenergy Intelligent 3.5A Charger for 29.6V 8S Li-ion / Li-Polymer Battery Pack $99.99 Specification:Input:100V-240V /50-60Hz AC PowerStandard USA AC power plug. For other country's Plug adapters, click herePatented 4 Stage charge algorithm guarantee 100% Protection (check the Datasheet for details)Automatic change 8S 29.6V Li-Po/Li-ion battery from any status. Output voltage19.2 V DC ~ 37.2V DC Battery capacity extend2.8Ah ~ 52Ah Number of cells8 Li-ion / Li-Polymer cells in series Charge current3.5A 0.1A Max. delivered power117.5 Rated AC input100~240VAC 50/60Hz Input voltage90~264VAC Rated input current0.81Arms Max. input power140W Dimension158mm x 90mm x 57.5mm Weight631gAccessories Included Premium metallic 3 pin connector (positive, null, negative) 1 standard Tamiya Female connector. Alligator clips red + black.Caution The charger is designed for indoor use only. Don't leave the charger unattended during charging. The Charger should be positionedhorizontally and work in well ventilated condition, avoid water andkeep away from flammable explosive goods.Don't cover the charger when charging, ambient temperature shall not be more than 40oC Don't touch the plug.Don't leave the batteries and chargers on wood surface or carpet. Cut off the power supply before connect or disconnect the charger with batteries.Don't try to disassemble the charger, High voltage inside, danger!Download product manual here. |
|
|
Tenergy Intelligent 2.2A Charger for 48.1 V 13S Li-ion / Li-Polymer Battery Pack $105.99 Specification:Input:100V-240V /50-60Hz AC PowerStandard USA AC power plug. For other country's Plug adapters, click herePatented 4 Stage charge algorithm guarantee 100% Protection (check the Datasheet for details)Automatic change 13S 48.1V Li-Po/Li-ion battery from any status. Output voltage31.2 V DC ~ 59.2V DC Battery capacity extend2Ah ~ 33Ah Number of cells13 Li-ion / Li-Polymer cells in series Charge current2.2A 0.1A Max. delivered power120 Rated AC input100~240VAC 50/60Hz Input voltage90~264VAC Rated input current0.83Arms Max. input power141W Dimension158mm x 90mm x 57.5mm Weight636gAccessories Included Premium metallic 3 pin connector (positive, null, negative) 1 standard Tamiya Female connector. Alligator clips red + black.Caution The charger is designed for indoor use only. Don't leave the charger unattended during charging. The Charger should be positionedhorizontally and work in well ventilated condition, avoid water andkeep away from flammable explosive goods.Don't cover the charger when charging, ambient temperature shall not be more than 40oC Don't touch the plug.Don't leave the batteries and chargers on wood surface or carpet. Cut off the power supply before connect or disconnect the charger with batteries.Don't try to disassemble the charger, High voltage inside, danger!Download product manual here. |
|
|
Tenergy Intelligent 3.2A Charger for 33.3V 9S Li-ion / Li-Polymer Battery Pack $99.99 Specification:Input:100V-240V /50-60Hz AC PowerStandard USA AC power plug. For other country's Plug adapters, click herePatented 4 Stage charge algorithm guarantee 100% Protection (check the Datasheet for details)Automatic change 9S 33.3V Li-Po/Li-ion battery from any status. Output voltage21.6 V DC ~ 41.6V DC Battery capacity extend2.6Ah ~ 48Ah Number of cells9 Li-ion / Li-Polymer cells in series Charge current3.2A 0.1A Max. delivered power121W Rated AC input100~240VAC 50/60Hz Input voltage90~264VAC Rated input current0.83Arms Max. input power142.5W Dimension158mm x 90mm x 57.5mm Weight642gAccessories Included Premium metallic 3 pin connector (positive, null, negative) 1 standard Tamiya Female connector. Alligator clips red + black.Caution The charger is designed for indoor use only. Don't leave the charger unattended during charging. The Charger should be positionedhorizontally and work in well ventilated condition, avoid water andkeep away from flammable explosive goods.Don't cover the charger when charging, ambient temperature shall not be more than 40oC Don't touch the plug.Don't leave the batteries and chargers on wood surface or carpet. Cut off the power supply before connect or disconnect the charger with batteries.Don't try to disassemble the charger, High voltage inside, danger!Download product manual here. |
|
|
Tenergy Intelligent 3A Charger for 37 V 10S Li-ion / Li-Polymer Battery Pack $99.99 Specification:Input:100V-240V /50-60Hz AC PowerStandard USA AC power plug. For other country's Plug adapters, click herePatented 4 Stage charge algorithm guarantee 100% Protection (check the Datasheet for details)Automatic change 10S 37V Li-Po/Li-ion battery from any status. Output voltage24 V DC ~ 46V DC Battery capacity extend2.4Ah ~ 45Ah Number of cells10 Li-ion / Li-Polymer cells in series Charge current3.0A 0.1A Max. delivered power126 Rated AC input100~240VAC 50/60Hz Input voltage90~264VAC Rated input current0.86Arms Max. input power148.5W Dimension158mm x 90mm x 57.5mm Weight631gAccessories Included Premium metallic 3 pin connector (positive, null, negative) 1 standard Tamiya Female connector. Alligator clips red + black.Caution The charger is designed for indoor use only. Don't leave the charger unattended during charging. The Charger should be positionedhorizontally and work in well ventilated condition, avoid water andkeep away from flammable explosive goods.Don't cover the charger when charging, ambient temperature shall not be more than 40oC Don't touch the plug.Don't leave the batteries and chargers on wood surface or carpet. Cut off the power supply before connect or disconnect the charger with batteries.Don't try to disassemble the charger, High voltage inside, danger!Download product manual here. |
|
|
Tenergy Intelligent 2A Charger for 55.5 V 15S Li-ion / Li-Polymer Battery Pack $105.99 Specification:Input:100V-240V /50-60Hz AC PowerStandard USA AC power plug. For other country's Plug adapters, click herePatented 4 Stage charge algorithm guarantee 100% Protection (check the Datasheet for details)Automatic change 15S 55.5V Li-Po/Li-ion battery from any status. Output voltage36 V DC ~ 68V DC Battery capacity extend1.6Ah ~ 30Ah Number of cells15 Li-ion / Li-Polymer cells in series Charge current2.0A 0.1A Max. delivered power126W Rated AC input100~240VAC 50/60Hz Input voltage90~264VAC Rated input current0.86Arms Max. input power148W Dimension158mm x 90mm x 57.5mm Weight636gAccessories Included Premium metallic 3 pin connector (positive, null, negative) 1 standard Tamiya Female connector. Alligator clips red + black.Caution The charger is designed for indoor use only. Don't leave the charger unattended during charging. The Charger should be positionedhorizontally and work in well ventilated condition, avoid water andkeep away from flammable explosive goods.Don't cover the charger when charging, ambient temperature shall not be more than 40oC Don't touch the plug.Don't leave the batteries and chargers on wood surface or carpet. Cut off the power supply before connect or disconnect the charger with batteries.Don't try to disassemble the charger, High voltage inside, danger!Download product manual here. |
|
|
Tenergy 2A Charger for 48V NiMH/NiCD Battery Pack $89.99 Specification:The best 48V NiMH/NiCD Battery Intelligent Charger in the market Charger Switches to Trickle status automatically when any of the following criteria is reached:(The strongest protection for your battery)Minus V Value > 3~5 mV/cellOr Maximum Cell Voltage > 1.56V/cell(NI-MH)1.7V/cellNI-CDOr Max. Cell Temp.>55Or Max. Cell Temp. exotherm >18Or Safety Timer=18hoursCompatible with 48V NiMH/NiCD Battery from 1.6AH to 30AH Charge current2A 0.2A Reversal polarity and Short-Circuit Protection ThermistorNTC type, 10K and =3950 Input voltage90~264VAC 50/60Hz DimensionsL/W/H, 148mm/78mm/43mm Power Indication & LED IndicationsPower ON -- Red FlashingCharging -- RedFully Charged -- GreenErrors Red Flashing Accessories Included Water Proof 3 Pin kirksite Connector (male and female) Tamiya Female connector.Alligator clips red + black.NTC themistor cable. Caution The charger is designed for indoor use only. Don't leave the charger unattended during charging.The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.Don't cover the charger when charging, ambient temperature shall not be more than 40oCDon't touch the plug.Don't leave the batteries and chargers on wood surface or carpet.Cut off the power supply before connect or disconnect the charger with batteries.Don't try to disassemble the charger, High voltage inside, danger!Download product Datasheet HERE. |


US $1,699.00




































![Star Wars: The Clone Wars - The Complete Season Two [Blu-ray]](http://ecx.images-amazon.com/images/I/51peqvX30HL._SL75_.jpg)
![Star Wars: The Clone Wars - The Complete Season One [Blu-ray]](http://ecx.images-amazon.com/images/I/51fLggYOxLL._SL75_.jpg)
![Cinderella (Walt Disney's Masterpiece) [VHS]](http://ecx.images-amazon.com/images/I/51JRS7PR6VL._SL75_.jpg)

Comment