Yvone Lyle's Cheap Furniture Online

This mount fits the majority of displays in the 23-37" size range and some models up to 42". Specifically, it fits VESA 50 - 200 hole patterns and TVs weighing up to 65lbs. If you are unfamiliar with VESA patterns, these are square or rectangular patterns between 2 and 8 inches per side. This mount provides 20" of extension, 180 degrees of rotation, +/- 15 degrees of tilt, 4 degrees of rotation adjustment, and collapses to 2.7" from the wall. The load bearing portions of the mount are constructed from High Grade Steel providing a sturdy and reliable mount and separate cover pieces for the wall plate and pivot joints providing a clean finished look. The package includes the mount, manual, all necessary installation hardware, and a 6" three-axis magnetic bubble level. This mount also includes a 10' High Speed HDMI with Ethernet cable. The HDMI cable allows the use of home entertainment networking, audio return, 3D playback and delivers the sharpest, richest viewing and listening experience possible.

This is a very substantial mount with Dual arms and heavy guage steel. The arms extend over 20" from the wall yet fold to less than 4.25". Even at full extension, this mount has very little sag or twist. It is rated for up to 165lbs and most displays 65" and smaller weigh under 100lbs. The unit has dual tilt adjustment knobs and it will tilt forward or back 15 degrees. The wall plate is 27.5" wide and has wide slots making it easy to mount into standard 16" studs even if they are not exactly 16" apart. The universal design will fit any display with a hole pattern up to 26.3" wide and 17" tall. The wall plate is 1/8" thick and very stable and includes large center hole for cable pass-though into the wall. This mount will swivel approximately 180 degrees depending on the size of your display. Dual TV safety screws are included to prevent accidental liftoff of the display. Installation instructions and hardware included. This mount also inckudes a 10' 1.4 HDMI Cable included. Capable of 3D signal, Audio Return, and Eathernet. This is a upgraded cable and similar cables sell for $15-$25.

OmniMount TV Ceiling Mount TRIA1B Mounting Kits (Temp)

The Tria Series wall shelf systems offer hassle-free shelving and cable management solutions suitable for any environment, with or without a flat panel. Hassle-free shelving and cable management solutions suitable for any environment. Click here for a larger image Neatly organize components without the need to run the connections through your wall. View a dimension diagram. Click here for a larger image Keep It Clean Tria 1 is a single-shelf, do-it-yourself solution that allows you to neatly organize components right under your flat panel without the need to run the connections through your wall. Tria 1 is designed with covers that easily snap on to the spine, for routing and concealing wires. The Tria 1 is constructed using 6mm tempered glass, and supports up to 30 lbs (13.6 kg). It's fully adjustable at one-inch increments, to get it set just where you need it, and is also compatible with OmniMount's Tria 2. Customize It The Tria 1 features paintable, trimmable covers make them customizable for any application. It can also be used with or without a flat panel, of course. Hardware Included The Tria 1 includes a complete hardware kit for installation, and is intedned to be mounted on a single wall stud. Tria 1 Specs Supports up to: 30 lbs (13.6 kg) Shelf: 6mm tempered glass Mounting: Single-stud Dimensions: 17.5 x 16.5 x 16.5 (445 x 419 x 419 mm) (W x H x D) Color: Black with black glass and Platinum with clear glass Warranty: 5 years About OmniMount OmniMount, an innovator of A/V mounts and furniture for more than a quarter century, is the choice of professional installers and the brand most recommended by flat panel manufacturers. What's in the Box Wall Plate, Shelf Bracket, Glass Shelf, Cable Cover, End Caps, Complete Hardware Kit, Instruction Manual

Adjustable TV Wall Mount

This VideoSecu tilt wall mount features a high capacity and low profile design, adjustable tilt 15 degrees for optimal viewing. The universal VCR, DVD mount bracket attaches directly to the wall, underneath any of the Plasma or LCD TV mounts and accommodates most front-panel-accessible components.

Features:Durable Black finish. High weight capacity, 132 lbs. Professinal flat panel TV mount / bracket. Easy installation, installation manual and fitting screws and bolts included. Tilt adjustment, viewing angle can be set up to -15 degrees (panel tilted down / forward). Compatible with LED, LCD, Plasma TVs and other flat panel displays measuring between 32" and 60".Specification: 1. Supportable Display Size: fits 99+% of TVs for 32"-60"2. Load Capacity: 132 lbs (60KG) 3. Material: 2.0mm SPCC (Cold Plate Steel) 4. Tilt: 15¡ãof downward tilt5. TV to Wall: Low profile less than 2" from the wall6. Max Hole Distance: 725mm X 480mm (28.5" x 18.9")7. Supports VESA standards up to 600mm X400mm8. Compliant to VESA standard 75/100/200/400/600/7009. Double Stud Installation10. All installation hardware included11. Size: Wall Panel: Length-78cm(30.7"), Width-22cm(8.7")Hook: Length-51cm(20")Important:1. Please install this TV mount / bracket on Firm / Solid / Strong wall. 2. If the LED, LCD, Plasma TVs and other flat panel displays size is up to 60", but the Max Hole Distance is within 725mm X 480mm, and the weight is within 132 lbs (60KG), this TV mount / bracket also works perfect for you. 3. When we refer to VESA sizes we are referring to the standard used to measure the hole pattern on the back of your display. If you do know know your VESA pattern you can simply measure the distance side to side and top to bottom on your display. The distance in millimeters is the VESA Hole Pattern. Installation hardware: (1) Rubber Blanket(2) Plum Flower Gasket(3) Plum Flower Gasket (4) Metallic Gasket(5) Metallic Gasket(6) Screw M5x12(7) Screw M8x12(8) Screw M6x12(9) Screw M5x30(10) Screw M6x30(11) Screw M8x30(12) Swell Plastic Button(13) Tapping Screw

Features and Benefits The VideoSecu projector ceiling mount is attractive, strong and light weight. Durable black finish comes with the latest design in safety, flexibility and value for many of today's most popular LCD projectors. No-Slip adjustment system allows you to quickly and easily fine tune your projector adjustments in order to achieve a perfectly square image. Once your projector is adjusted, it will stay true for as long as you require it to. The unique arm designed arms allows the safe installation for expensive projectors, and it offers adjustment for width and depth, giving maximum versatility for a wide variety of projectors. The mounting system comes with everything you need to assemble a complete mount in a single box. By using the included telescoping ceiling mask, this mount extends from the ceiling 16.9" to 25.6". How can I determine if this mount will fit my projector? Projectors may have 3, 4 or 5 threaded holes for ceiling mount. First make sure that the projector does not exceed the 44lb weight limit. Next, find out the maximal diagonal of the holes. It should not be over 12.5". In other words, if the distance of any 2 out of the 3, 4 or 5 holes is not more than 12.5", then the mount should fit fine. If your projector has holes more than 12.5" apart, you need extra extender (sold separately in our Amazon store ASIN: B0036828KS) which can cover an area up to 17 inch in diameter.

This wall mount is designed for LCD Monitor and up to 27" Flat Screen TV. Aluminum alloy construction provides strong support for LCD screens up to 33 lb. The swivel arms fold flat against the wall or extend out up to 16 inch. This two-link arm provides multi-directional adjustment tilts, swivels, swings, and extends. 3 pivot points for virtually limitless adjustment. The black finish elegantly complements offices, conference rooms, merchandising displays, hotel rooms or any room in the home. This mount is VESA 75/100 compliant. Ships pre-assembled for fast and easy installation.