Yvone Lyle's Cheap Furniture Online

This mount fits the majority of displays in the 23-37" size range and some models up to 42". Specifically, it fits VESA 50 - 200 hole patterns and TVs weighing up to 65lbs. If you are unfamiliar with VESA patterns, these are square or rectangular patterns between 2 and 8 inches per side. This mount provides 20" of extension, 180 degrees of rotation, +/- 15 degrees of tilt, 4 degrees of rotation adjustment, and collapses to 2.7" from the wall. The load bearing portions of the mount are constructed from High Grade Steel providing a sturdy and reliable mount and separate cover pieces for the wall plate and pivot joints providing a clean finished look. The package includes the mount, manual, all necessary installation hardware, and a 6" three-axis magnetic bubble level. This mount also includes a 10' High Speed HDMI with Ethernet cable. The HDMI cable allows the use of home entertainment networking, audio return, 3D playback and delivers the sharpest, richest viewing and listening experience possible.

This is a very substantial mount with Dual arms and heavy guage steel. The arms extend over 20" from the wall yet fold to less than 4.25". Even at full extension, this mount has very little sag or twist. It is rated for up to 165lbs and most displays 65" and smaller weigh under 100lbs. The unit has dual tilt adjustment knobs and it will tilt forward or back 15 degrees. The wall plate is 27.5" wide and has wide slots making it easy to mount into standard 16" studs even if they are not exactly 16" apart. The universal design will fit any display with a hole pattern up to 26.3" wide and 17" tall. The wall plate is 1/8" thick and very stable and includes large center hole for cable pass-though into the wall. This mount will swivel approximately 180 degrees depending on the size of your display. Dual TV safety screws are included to prevent accidental liftoff of the display. Installation instructions and hardware included. This mount also inckudes a 10' 1.4 HDMI Cable included. Capable of 3D signal, Audio Return, and Eathernet. This is a upgraded cable and similar cables sell for $15-$25.

The ECS is a glass wall shelf that is designed to hold a cable box, DVD player or most any other component that needs to be located next to a mounted television. Designed to hold a cable box, DVD player or most any other component that needs to be located next to a mounted television. Click here for a larger image Supports components up to 30 lbs. ECS dimension diagram. Click here for a larger image Made for Electronics The ECS shelf is made with 8mm tempered glass, an the wall plate hides bolts, for a clean, modern look. The wall plate features integrated cable management, for concealing messy cabling. The shelf features a pivoting arm, for side-to-side movement, and a black nylon stabilizing strap for keeping your components in place. Hardware Included The ECS includes a complete hardware kit for installation, and is intedned to be mounted on a single wall stud. ECS Specs Supports up to: 30 lbs (13.6 kg) maximum shelf capacity Shelf: 8mm tempered glass Pan: Left and right Mounting: Single-stud mounting Dimensions: 18.0 x 9.1 x 20.1 inches (457 x 231 x 571 mm) (W x H x D) Color: Black with clear glass and Platinum with clear glass About OmniMount OmniMount, an innovator of A/V mounts and furniture for more than a quarter century, is the choice of professional installers and the brand most recommended by flat panel manufacturers. What's in the Box Glass Shelf, Mounting Arm, Mounting Arm Cover, Wall Bracket, Wall Bracket Cover, Complete Mount Installation Hardware Kit, Instruction Manual

OmniMount ECSB Component Shelf ECSB 1156

OmniMount OMF Wall Mount OMF Mounting Kits

Features:Durable Black finish. High weight capacity, 132 lbs. Professinal flat panel TV mount / bracket. Easy installation, installation manual and fitting screws and bolts included. Tilt adjustment, viewing angle can be set up to -15 degrees (panel tilted down / forward). Compatible with LED, LCD, Plasma TVs and other flat panel displays measuring between 32" and 60".Specification: 1. Supportable Display Size: fits 99+% of TVs for 32"-60"2. Load Capacity: 132 lbs (60KG) 3. Material: 2.0mm SPCC (Cold Plate Steel) 4. Tilt: 15¡ãof downward tilt5. TV to Wall: Low profile less than 2" from the wall6. Max Hole Distance: 725mm X 480mm (28.5" x 18.9")7. Supports VESA standards up to 600mm X400mm8. Compliant to VESA standard 75/100/200/400/600/7009. Double Stud Installation10. All installation hardware included11. Size: Wall Panel: Length-78cm(30.7"), Width-22cm(8.7")Hook: Length-51cm(20")Important:1. Please install this TV mount / bracket on Firm / Solid / Strong wall. 2. If the LED, LCD, Plasma TVs and other flat panel displays size is up to 60", but the Max Hole Distance is within 725mm X 480mm, and the weight is within 132 lbs (60KG), this TV mount / bracket also works perfect for you. 3. When we refer to VESA sizes we are referring to the standard used to measure the hole pattern on the back of your display. If you do know know your VESA pattern you can simply measure the distance side to side and top to bottom on your display. The distance in millimeters is the VESA Hole Pattern. Installation hardware: (1) Rubber Blanket(2) Plum Flower Gasket(3) Plum Flower Gasket (4) Metallic Gasket(5) Metallic Gasket(6) Screw M5x12(7) Screw M8x12(8) Screw M6x12(9) Screw M5x30(10) Screw M6x30(11) Screw M8x30(12) Swell Plastic Button(13) Tapping Screw

Use these Yankee Candle Car Jar air fresheners to fill your car, RV, closet, locker, boat, tent, and many other spaces with great Yankee fragrance. 3 per pack. No. 1114273: French Vanilla No. 1114285: Midsummer's Night No. 1114292: MacIntosh No. 1114304: Sage & Citrus No. 1114305: Clean Cotton No. 1114306: Coconut No. 1119496: Leather No. 1119497: Home Sweet Home No. 1133677: Sun & Shade No. 1137658: Black Cherry No. 1158160: Vanilla Lime No. 1158369: Lavender Vanilla

Buy 2 Stands for a Horizontal Quad Stand.The space between the monitors is fully adjustable.Easy to install and sets up in minutes.This LCD Monitor Pole with Double-Link Swing Arm provides a secure and elevated position for two flat-screen monitors to help free up valuable desk and work space. It's fully adjustable tilt, rotate, side-to-side, height, and tension settings enable a comfortable and productive viewing position that helps reduce eye fatigue, neck, and back strain. LCD monitors can be easily rotated around the pole to allow others to view presentations and other multimedia from almost any direction.Durable die-cast aluminum construction and a sturdy clamp provide a quick, easy, and secure mount to a desktop or other horizontal surface. Ready to install with included hardware, there's no need to drill holes into desks or countertopsFEATURES36" double-link swing arms optimize ergonomics and monitor views with separate tilt, rotate, side-to-side, height, and tension adjustments -- Die-cast aluminum pole with heavy-duty clamp mounts to desktop or other surface -- Easy installation ideal for office, studio, IT network, and security applications - no drilling required - fits monitors up to 24" and 16 pounds eachSPECIFICATIONSFits 75 x 75 mm / 100 x 100 mm VESA-compliant monitors -- Monitor weight capacity: up to 16 lbs. each; 32 lbs.total -- Installs on horizontal surfaces up to 3.5 in. thickDIMENSIONSHeight (pole): 18 in. -- Circumference (pole): 4.5 in. -- Arm length (radius): 15.5 in. -- Arm width (extended): 36 in. -- Weight: 14 lbs.PACKAGE CONTENTSLCD Monitor Pole with Double-Link Swing Arm -- Cable management clips and trim caps -- C-clamp with thumb screws (2) and mounting screws (2) -- Monitor mounting screws (8) -- Installation hardware with instructions and hex tool

Canon SELPHY CP800 Dye Sublimation Printer 4350B001 Dye Sublimation Printers